NE5534ADR2 vs NE5534ADR2G Vergleich
Detaillierter Direktvergleich von NE5534ADR2 von onsemi und NE5534ADR2G von onsemi. Vergleichen Sie die wichtigsten Spezifikationen, elektrischen Parameter, Gehäuse, Lebenszyklusstatus, Preise und Verfügbarkeit, um das beste Bauteil für Ihre Designanforderungen zu ermitteln.
Spezifikationsvergleich
| Parameter | NE5534ADR2 | NE5534ADR2G |
|---|---|---|
| Marke | onsemi | onsemi |
| Kategorie | Amplifier ICs | Amplifier ICs |
| Lebenszyklusstatus | Aktiv | Aktiv |
| Amplifier Type | General Purpose | General Purpose |
| Number of Circuits | 1 circuit | 1 circuit |
| Topologie | Single operational amplifier | — |
| Input Voltage Noise Density | 3.5 nV/√Hz typical | — |
| Gain-Bandwidth Product | 10 MHz typical | — |
| Unity-Gain Bandwidth | 10 MHz typical | — |
| Slew Rate | 13 V/µs typical | 13 V/us |
| High DC Voltage Gain | 100 V/mV typical | — |
| Common-Mode Rejection Ratio | 100 dB typical | — |
| Peak-to-Peak Output Voltage Swing | 32 V typical at VCC+ +18 V and 600 W | — |
| Gehäuse | 8-SOIC, 0.154 inch width, 3.90 mm width | 8-SOIC, 3.90 mm width |
| Packaging | Tape and reel | Tape and Reel (TR) |
| Montageart | Surface mount | — |
| Product Description | Single high-performance low-noise operational amplifier | — |
| Manufacturer | onsemi | — |
| RoHS-Status | [DATA_NEEDED: RoHS status] | [DATA_NEEDED: RoHS status] |
| Betriebstemperaturbereich | [DATA_NEEDED: operating temperature range] | [DATA_NEEDED: operating temperature range] |
| Supply Voltage Range | [DATA_NEEDED: supply voltage range] | 3 V to 20 V |
| Offset Voltage | [DATA_NEEDED: input offset voltage] | — |
| Input Bias Current | [DATA_NEEDED: input bias current] | [DATA_NEEDED: input bias current] |
| Product Type | — | Single low-noise operational amplifier |
| Temperature Grade | — | Commercial |
| Noise Performance | — | Low noise |
| Output Drive Capability | — | Improved |
| Small-Signal Bandwidth | — | [DATA_NEEDED: small-signal bandwidth] |
| Power Bandwidth | — | [DATA_NEEDED: power bandwidth] |
| Input Noise Voltage | — | [DATA_NEEDED: input noise voltage] |
| REACH Status | — | [DATA_NEEDED: REACH status] |
| AEC-Q100 Qualification | — | [DATA_NEEDED: AEC-Q100 qualification status] |