NE5534ADR2 vs NE5534ADR2G Comparaison
Comparaison détaillée côte à côte de NE5534ADR2 par onsemi et NE5534ADR2G par onsemi. Comparez les spécifications clés, les paramètres électriques, le conditionnement, le statut de cycle de vie, les prix et la disponibilité pour déterminer le meilleur composant pour vos exigences de conception.
Comparaison des spécifications
| Paramètre | NE5534ADR2 | NE5534ADR2G |
|---|---|---|
| Marque | onsemi | onsemi |
| Catégorie | Amplifier ICs | Amplifier ICs |
| Statut du cycle de vie | Actif | Actif |
| Amplifier Type | General Purpose | General Purpose |
| Number of Circuits | 1 circuit | 1 circuit |
| Topologie | Single operational amplifier | — |
| Input Voltage Noise Density | 3.5 nV/√Hz typical | — |
| Gain-Bandwidth Product | 10 MHz typical | — |
| Unity-Gain Bandwidth | 10 MHz typical | — |
| Slew Rate | 13 V/µs typical | 13 V/us |
| High DC Voltage Gain | 100 V/mV typical | — |
| Common-Mode Rejection Ratio | 100 dB typical | — |
| Peak-to-Peak Output Voltage Swing | 32 V typical at VCC+ +18 V and 600 W | — |
| Boîtier | 8-SOIC, 0.154 inch width, 3.90 mm width | 8-SOIC, 3.90 mm width |
| Packaging | Tape and reel | Tape and Reel (TR) |
| Type de montage | Surface mount | — |
| Product Description | Single high-performance low-noise operational amplifier | — |
| Manufacturer | onsemi | — |
| Statut RoHS | [DATA_NEEDED: RoHS status] | [DATA_NEEDED: RoHS status] |
| Plage de température de fonctionnement | [DATA_NEEDED: operating temperature range] | [DATA_NEEDED: operating temperature range] |
| Supply Voltage Range | [DATA_NEEDED: supply voltage range] | 3 V to 20 V |
| Offset Voltage | [DATA_NEEDED: input offset voltage] | — |
| Input Bias Current | [DATA_NEEDED: input bias current] | [DATA_NEEDED: input bias current] |
| Product Type | — | Single low-noise operational amplifier |
| Temperature Grade | — | Commercial |
| Noise Performance | — | Low noise |
| Output Drive Capability | — | Improved |
| Small-Signal Bandwidth | — | [DATA_NEEDED: small-signal bandwidth] |
| Power Bandwidth | — | [DATA_NEEDED: power bandwidth] |
| Input Noise Voltage | — | [DATA_NEEDED: input noise voltage] |
| REACH Status | — | [DATA_NEEDED: REACH status] |
| AEC-Q100 Qualification | — | [DATA_NEEDED: AEC-Q100 qualification status] |