NE5534DRE4 vs NE5534DR Vergleich
Detaillierter Direktvergleich von NE5534DRE4 von Texas Instruments und NE5534DR von Texas Instruments. Vergleichen Sie die wichtigsten Spezifikationen, elektrischen Parameter, Gehäuse, Lebenszyklusstatus, Preise und Verfügbarkeit, um das beste Bauteil für Ihre Designanforderungen zu ermitteln.
Texas Instruments
NE5534DR - 30V, 10MHz Low-Noise Audio Op Amp | Texas Instruments (Tape & Reel)
NE5534DR ✓ AktivSpezifikationsvergleich
| Parameter | NE5534DRE4 | NE5534DR |
|---|---|---|
| Marke | Texas Instruments | Texas Instruments |
| Kategorie | Amplifier ICs | Amplifier ICs |
| Lebenszyklusstatus | Aktiv | Aktiv |
| Amplifier Type | Low-Noise Operational Amplifier | — |
| Number of Channels | 1 Circuit | — |
| Unity-Gain Bandwidth | 10 MHz (typical) | 10 MHz typical |
| Slew Rate | 13 V/μs (typical) | 13 V/us typical |
| Input Voltage Noise Density | 3.5 nV/√Hz (typical) | — |
| Common-Mode Rejection Ratio (CMRR) | 100 dB (typical) | — |
| DC Open-Loop Voltage Gain | 100 V/mV (typical) | — |
| Peak-to-Peak Output Voltage Swing | 32 V (typical, ±18V supply, 600 Ω load) | 32 V typical at ±18 V |
| Supply Voltage Range (Dual) | ±3 V to ±20 V | — |
| Supply Voltage Range (Single) | 6 V to 40 V | — |
| Betriebstemperaturbereich | -55 °C to +125 °C | [DATA_NEEDED: operating temperature range] |
| Gehäuse | 8-pin SOIC (D) | 8-SOIC |
| Montageart | Surface Mount | Surface Mount |
| Packaging | Tape and Reel (DRE4 suffix) | — |
| RoHS-Status | Compliant | [DATA_NEEDED: RoHS status] |
| Product Type | — | Single low-noise operational amplifier |
| Manufacturer | — | Texas Instruments |
| Number of Circuits | — | 1 |
| Total Supply Voltage | — | 10 V to 30 V |
| Equivalent Input Noise Voltage | — | 3.5 nV/Hz |
| DC Voltage Gain | — | 100 dB typical |
| Open-Loop Voltage Gain | — | 100 V/mV typical |
| Supply Configuration | — | ±5 V to ±15 V |
| Common-Mode Rejection Ratio | — | 100 dB typical |
| Input Bias Current | — | [DATA_NEEDED: input bias current] |
| Output Current Capability | — | [DATA_NEEDED: output current capability] |
| REACH Status | — | [DATA_NEEDED: REACH status] |
| Lead-Free Status | — | [DATA_NEEDED: lead-free status] |