NE5534DRE4 vs NE5534DR तुलना
विस्तृत दोनों ओर की तुलना NE5534DRE4 द्वारा Texas Instruments और NE5534DR द्वारा Texas Instruments. मुख्य विशेषताओं, इलेक्ट्रिकल पैरामीटर, पैकेजिंग, चक्र स्थिति, मूल्यांकन और उपलब्धता को तुलना करके अपनी डिजाइन की आवश्यकताओं के लिए सबसे अच्छा घटक निर्धारित करें。
Texas Instruments
NE5534DRE4 - Single Low-Noise Op Amp 10MHz | Texas Instruments
NE5534DRE4 ✓ सक्रियTexas Instruments
NE5534DR - 30V, 10MHz Low-Noise Audio Op Amp | Texas Instruments (Tape & Reel)
NE5534DR ✓ सक्रियविशेषता तुलना
| पैरामीटर | NE5534DRE4 | NE5534DR |
|---|---|---|
| ब्रांड | Texas Instruments | Texas Instruments |
| श्रेणी | Amplifier ICs | Amplifier ICs |
| लाइफसाइकिल स्थिति | सक्रिय | सक्रिय |
| Amplifier Type | Low-Noise Operational Amplifier | — |
| Number of Channels | 1 Circuit | — |
| Unity-Gain Bandwidth | 10 MHz (typical) | 10 MHz typical |
| Slew Rate | 13 V/μs (typical) | 13 V/us typical |
| Input Voltage Noise Density | 3.5 nV/√Hz (typical) | — |
| Common-Mode Rejection Ratio (CMRR) | 100 dB (typical) | — |
| DC Open-Loop Voltage Gain | 100 V/mV (typical) | — |
| Peak-to-Peak Output Voltage Swing | 32 V (typical, ±18V supply, 600 Ω load) | 32 V typical at ±18 V |
| Supply Voltage Range (Dual) | ±3 V to ±20 V | — |
| Supply Voltage Range (Single) | 6 V to 40 V | — |
| ऑपरेटिंग तापमान रेंज | -55 °C to +125 °C | [DATA_NEEDED: operating temperature range] |
| पैकेज | 8-pin SOIC (D) | 8-SOIC |
| माउंटिंग प्रकार | Surface Mount | Surface Mount |
| Packaging | Tape and Reel (DRE4 suffix) | — |
| RoHS स्थिति | Compliant | [DATA_NEEDED: RoHS status] |
| Product Type | — | Single low-noise operational amplifier |
| Manufacturer | — | Texas Instruments |
| Number of Circuits | — | 1 |
| Total Supply Voltage | — | 10 V to 30 V |
| Equivalent Input Noise Voltage | — | 3.5 nV/Hz |
| DC Voltage Gain | — | 100 dB typical |
| Open-Loop Voltage Gain | — | 100 V/mV typical |
| Supply Configuration | — | ±5 V to ±15 V |
| Common-Mode Rejection Ratio | — | 100 dB typical |
| Input Bias Current | — | [DATA_NEEDED: input bias current] |
| Output Current Capability | — | [DATA_NEEDED: output current capability] |
| REACH Status | — | [DATA_NEEDED: REACH status] |
| Lead-Free Status | — | [DATA_NEEDED: lead-free status] |