OPA541AP vs OPA544T Vergleich
Detaillierter Direktvergleich von OPA541AP von Texas Instruments und OPA544T von Texas Instruments. Vergleichen Sie die wichtigsten Spezifikationen, elektrischen Parameter, Gehäuse, Lebenszyklusstatus, Preise und Verfügbarkeit, um das beste Bauteil für Ihre Designanforderungen zu ermitteln.
Spezifikationsvergleich
| Parameter | OPA541AP | OPA544T |
|---|---|---|
| Marke | Texas Instruments | Texas Instruments |
| Kategorie | Amplifier ICs | Amplifier ICs |
| Lebenszyklusstatus | Aktiv | Aktiv |
| Amplifier Type | Single power operational amplifier | — |
| Number of Channels | 1 channel | — |
| Maximum Total Supply Voltage | 80 V (±40 V) | — |
| Continuous Output Current | 5 A | — |
| Peak Output Current | 10 A | — |
| Current-Limit Configuration | Programmable with one external resistor | — |
| Input Transistor Type | FET input | — |
| Process Technology | Proprietary bipolar and FET process | — |
| Gain-Bandwidth Product | 1.6 MHz | — |
| Slew Rate | 10 V/µs | 8 V/µs |
| Supply Voltage Range | 20 V to 70 V | — |
| Gehäuse | TO-220-11 plastic power package | 5-lead TO-220 plastic package |
| Pin-Anzahl | 11 pins | — |
| Montageart | Through-hole | Through-hole power package with copper tab |
| RoHS-Status | [DATA_NEEDED: RoHS status] | unknown |
| REACH Status | [DATA_NEEDED: REACH status] | unknown |
| AEC-Q100 Qualification | [DATA_NEEDED: AEC-Q100 qualification status] | not_applicable |
| Device Type | — | Power operational amplifier |
| Typical Output Current | — | 4 A |
| Minimum High Output Current | — | 2 A |
| Power Supply Range | — | ±10 V to ±35 V |
| Maximum Supply Voltage | — | ±35 V |
| Input Bias Current | — | 100 pA maximum |
| Output Protection | — | Internal current limiting |
| Thermal Protection | — | Thermal shutdown protection |
| Input Type | — | FET input |
| Lead Count | — | 5 leads |
| Betriebstemperaturbereich | — | [DATA_NEEDED: operating temperature range] |
| Open-Loop Gain | — | [DATA_NEEDED: open-loop gain] |
| Input Offset Voltage | — | [DATA_NEEDED: input offset voltage] |
| Output Voltage Swing | — | [DATA_NEEDED: output voltage swing] |