OPA541AP vs OPA544T Comparaison
Comparaison détaillée côte à côte de OPA541AP par Texas Instruments et OPA544T par Texas Instruments. Comparez les spécifications clés, les paramètres électriques, le conditionnement, le statut de cycle de vie, les prix et la disponibilité pour déterminer le meilleur composant pour vos exigences de conception.
Comparaison des spécifications
| Paramètre | OPA541AP | OPA544T |
|---|---|---|
| Marque | Texas Instruments | Texas Instruments |
| Catégorie | Amplifier ICs | Amplifier ICs |
| Statut du cycle de vie | Actif | Actif |
| Amplifier Type | Single power operational amplifier | — |
| Number of Channels | 1 channel | — |
| Maximum Total Supply Voltage | 80 V (±40 V) | — |
| Continuous Output Current | 5 A | — |
| Peak Output Current | 10 A | — |
| Current-Limit Configuration | Programmable with one external resistor | — |
| Input Transistor Type | FET input | — |
| Process Technology | Proprietary bipolar and FET process | — |
| Gain-Bandwidth Product | 1.6 MHz | — |
| Slew Rate | 10 V/µs | 8 V/µs |
| Supply Voltage Range | 20 V to 70 V | — |
| Boîtier | TO-220-11 plastic power package | 5-lead TO-220 plastic package |
| Nombre de broches | 11 pins | — |
| Type de montage | Through-hole | Through-hole power package with copper tab |
| Statut RoHS | [DATA_NEEDED: RoHS status] | unknown |
| REACH Status | [DATA_NEEDED: REACH status] | unknown |
| AEC-Q100 Qualification | [DATA_NEEDED: AEC-Q100 qualification status] | not_applicable |
| Device Type | — | Power operational amplifier |
| Typical Output Current | — | 4 A |
| Minimum High Output Current | — | 2 A |
| Power Supply Range | — | ±10 V to ±35 V |
| Maximum Supply Voltage | — | ±35 V |
| Input Bias Current | — | 100 pA maximum |
| Output Protection | — | Internal current limiting |
| Thermal Protection | — | Thermal shutdown protection |
| Input Type | — | FET input |
| Lead Count | — | 5 leads |
| Plage de température de fonctionnement | — | [DATA_NEEDED: operating temperature range] |
| Open-Loop Gain | — | [DATA_NEEDED: open-loop gain] |
| Input Offset Voltage | — | [DATA_NEEDED: input offset voltage] |
| Output Voltage Swing | — | [DATA_NEEDED: output voltage swing] |