OPA651U vs NE5532D Vergleich
Detaillierter Direktvergleich von OPA651U von Texas Instruments und NE5532D von Texas Instruments. Vergleichen Sie die wichtigsten Spezifikationen, elektrischen Parameter, Gehäuse, Lebenszyklusstatus, Preise und Verfügbarkeit, um das beste Bauteil für Ihre Designanforderungen zu ermitteln.
Texas Instruments
NE5532D - Dual 10MHz Low-Noise Audio Op Amp | Texas Instruments (Tape & Reel)
NE5532D ✓ AktivSpezifikationsvergleich
| Parameter | OPA651U | NE5532D |
|---|---|---|
| Marke | Texas Instruments | Texas Instruments |
| Kategorie | Amplifier ICs | Amplifier ICs |
| Lebenszyklusstatus | Obsolete | Aktiv |
| Lagerstatus | In Stock | In Stock |
| Stückpreis (USD) | $0,92 | $0,00 |
| Amplifier Type | Voltage Feedback Operational Amplifier | Dual low-noise operational amplifier |
| Number of Channels | 1 | — |
| Slew Rate | 340 V/µs | 10 V/μs typical |
| Small-Signal Bandwidth (G = +2) | 470 MHz | — |
| Settling Time to 0.01% | 16 ns | — |
| Quiescent Power | 50 mW (typ) | — |
| Supply Voltage Range | ±4.5 V to ±5.5 V (single 9 V to 11 V) | — |
| Input Bias Current | 4 µA | [DATA_NEEDED: input bias current] |
| Stable Gain | ≥ 2 V/V | — |
| Differential Gain / Phase | 0.05% / 0.1° | — |
| Low-Distortion Bandwidth | 5 MHz | — |
| Betriebstemperaturbereich | -40 °C to +85 °C | 0 °C to +70 °C for NE5532x |
| Gehäuse | 8-SOIC (D, 0.154" / 3.90 mm width) | 8-pin SOIC |
| Montageart | Surface Mount | Surface Mount |
| MSL-Level | [DATA_NEEDED: MSL rating] | — |
| RoHS-Status | [DATA_NEEDED: RoHS compliance] | [DATA_NEEDED: RoHS status] |
| Pinout | Standard SOIC-8 single op-amp (OUT, IN-, IN+, V-, DIS*, V+, NC, V+) | — |
| Number of Amplifier Circuits | — | 2 circuits |
| Equivalent Input Noise Voltage | — | 5 nV/√Hz typical at 1 kHz |
| Unity-Gain Bandwidth | — | 10 MHz typical |
| DC Voltage Gain | — | 100 V/mV typical |
| Common-Mode Rejection Ratio | — | 100 dB typical |
| Specified Supply Voltage Range | — | ±5 V to ±15 V |
| Maximum Total Supply Voltage | — | 30 V |
| Output Voltage Swing | — | 32 V peak-to-peak typical at ±18 V and 600 Ω load |
| Product Category | — | Standard general-purpose amplifier |
| Application Category | — | Audio applications |
| Manufacturer | — | Texas Instruments |
| REACH Status | — | [DATA_NEEDED: REACH status] |
| AEC-Q100 Qualification | — | [DATA_NEEDED: AEC-Q100 qualification] |
| Lead-Free Status | — | [DATA_NEEDED: lead-free status] |
| Halogen-Free Status | — | [DATA_NEEDED: halogen-free status] |
| Versorgungsstrom | — | [DATA_NEEDED: supply current] |
| Open-Loop Gain | — | [DATA_NEEDED: open-loop gain at specified frequency] |
| Noise at 20 Hz to 20 kHz | — | [DATA_NEEDED: total input noise over audio bandwidth] |