OPA651U vs NE5532D Comparación
Comparación detallada lado a lado de OPA651U por Texas Instruments y NE5532D por Texas Instruments. Compare las especificaciones clave, los parámetros eléctricos, el encapsulado, el estado del ciclo de vida, los precios y la disponibilidad para determinar el mejor componente para los requisitos de su diseño.
Texas Instruments
NE5532D - Dual 10MHz Low-Noise Audio Op Amp | Texas Instruments (Tape & Reel)
NE5532D ✓ ActivoComparación de especificaciones
| Parámetro | OPA651U | NE5532D |
|---|---|---|
| Marca | Texas Instruments | Texas Instruments |
| Categoría | Amplifier ICs | Amplifier ICs |
| Estado del ciclo de vida | Obsolete | Activo |
| Estado del stock | In Stock | In Stock |
| Precio unitario (USD) | $0,92 | $0,00 |
| Amplifier Type | Voltage Feedback Operational Amplifier | Dual low-noise operational amplifier |
| Number of Channels | 1 | — |
| Slew Rate | 340 V/µs | 10 V/μs typical |
| Small-Signal Bandwidth (G = +2) | 470 MHz | — |
| Settling Time to 0.01% | 16 ns | — |
| Quiescent Power | 50 mW (typ) | — |
| Supply Voltage Range | ±4.5 V to ±5.5 V (single 9 V to 11 V) | — |
| Input Bias Current | 4 µA | [DATA_NEEDED: input bias current] |
| Stable Gain | ≥ 2 V/V | — |
| Differential Gain / Phase | 0.05% / 0.1° | — |
| Low-Distortion Bandwidth | 5 MHz | — |
| Rango de temperatura de funcionamiento | -40 °C to +85 °C | 0 °C to +70 °C for NE5532x |
| Encapsulado | 8-SOIC (D, 0.154" / 3.90 mm width) | 8-pin SOIC |
| Tipo de montaje | Surface Mount | Surface Mount |
| Nivel MSL | [DATA_NEEDED: MSL rating] | — |
| Estado RoHS | [DATA_NEEDED: RoHS compliance] | [DATA_NEEDED: RoHS status] |
| Pinout | Standard SOIC-8 single op-amp (OUT, IN-, IN+, V-, DIS*, V+, NC, V+) | — |
| Number of Amplifier Circuits | — | 2 circuits |
| Equivalent Input Noise Voltage | — | 5 nV/√Hz typical at 1 kHz |
| Unity-Gain Bandwidth | — | 10 MHz typical |
| DC Voltage Gain | — | 100 V/mV typical |
| Common-Mode Rejection Ratio | — | 100 dB typical |
| Specified Supply Voltage Range | — | ±5 V to ±15 V |
| Maximum Total Supply Voltage | — | 30 V |
| Output Voltage Swing | — | 32 V peak-to-peak typical at ±18 V and 600 Ω load |
| Product Category | — | Standard general-purpose amplifier |
| Application Category | — | Audio applications |
| Manufacturer | — | Texas Instruments |
| REACH Status | — | [DATA_NEEDED: REACH status] |
| AEC-Q100 Qualification | — | [DATA_NEEDED: AEC-Q100 qualification] |
| Lead-Free Status | — | [DATA_NEEDED: lead-free status] |
| Halogen-Free Status | — | [DATA_NEEDED: halogen-free status] |
| Corriente de alimentación | — | [DATA_NEEDED: supply current] |
| Open-Loop Gain | — | [DATA_NEEDED: open-loop gain at specified frequency] |
| Noise at 20 Hz to 20 kHz | — | [DATA_NEEDED: total input noise over audio bandwidth] |