P82B96P vs PCA9557D Vergleich
Detaillierter Direktvergleich von P82B96P von Texas Instruments und PCA9557D von Texas Instruments. Vergleichen Sie die wichtigsten Spezifikationen, elektrischen Parameter, Gehäuse, Lebenszyklusstatus, Preise und Verfügbarkeit, um das beste Bauteil für Ihre Designanforderungen zu ermitteln.
Texas Instruments
PCA9557D - 8-Bit I2C/SMBus I/O Expander with Reset | TI (Tape & Reel)
PCA9557D ✗ AbgekündigtSpezifikationsvergleich
| Parameter | P82B96P | PCA9557D |
|---|---|---|
| Marke | Texas Instruments | Texas Instruments |
| Kategorie | Interface ICs | Interface ICs |
| Lebenszyklusstatus | Aktiv | Ende des Lebenszyklus |
| Product Type | 2-bit bidirectional I2C/SMBus buffer and cable extender | — |
| Number of Channels | 2 channels | — |
| Operating Supply Voltage Range | 2 V to 15 V | — |
| Maximum Stated Operating Frequency | 400 kHz | — |
| Bus Compatibility | I2C and SMBus | — |
| Data Direction | Bidirectional | — |
| Interface Architecture | Non-latching bidirectional bus interface | — |
| Direction Control Input | None | — |
| Supported Logic Levels | 2 V to 15 V | — |
| Sx/Sy Same-Node Connection | Not supported | — |
| Gehäuse | 8-pin PDIP | 16-SOIC (DR, 7.5 mil pitch) |
| Montageart | Through-hole | Surface Mount |
| Betriebstemperaturbereich | [DATA_NEEDED: operating temperature range] | — |
| Ruhestrom | [DATA_NEEDED: quiescent current] | — |
| Maximum Bus Capacitance | [DATA_NEEDED: maximum bus capacitance] | — |
| Propagation Delay | [DATA_NEEDED: propagation delay] | — |
| Input Logic High Voltage | [DATA_NEEDED: input logic-high voltage] | — |
| Input Logic Low Voltage | [DATA_NEEDED: input logic-low voltage] | — |
| Output Low-Level Voltage | [DATA_NEEDED: output low-level voltage] | — |
| Versorgungsstrom | [DATA_NEEDED: supply current] | — |
| RoHS-Status | [DATA_NEEDED: RoHS status] | Compliant |
| REACH Status | [DATA_NEEDED: REACH status] | — |
| Lead-Free Status | [DATA_NEEDED: lead-free status] | — |
| Number of I/O Bits | — | 8 |
| Schnittstelle | — | I2C, SMBus |
| Bus Frequency (Max) | — | 400 kHz |
| Supply Voltage (VCC) | — | 2.3 V to 5.5 V |
| Betriebstemperatur | — | -40 C to +85 C |
| Standby Current (Max) | — | 1 uA |
| Output Drive Current per Bit | — | [DATA_NEEDED: per-bit source/sink mA rating] |
| I/O Voltage Tolerance | — | 5.5 V tolerant |
| Reset Input | — | Active-low hardware RESET + software reset (general call) |
| Interrupt Output (INT) | — | Yes, open-drain |
| Slave Address Pins | — | A0, A1, A2 (3 pins, 8 addresses within family) |
| MSL-Level | — | 1 (unlimited floor life) |
| Lead-Free | — | Yes |
| Configuration Registers | — | Input/output direction registers, polarity inversion |