P82B96P vs PCA9557D Comparaison
Comparaison détaillée côte à côte de P82B96P par Texas Instruments et PCA9557D par Texas Instruments. Comparez les spécifications clés, les paramètres électriques, le conditionnement, le statut de cycle de vie, les prix et la disponibilité pour déterminer le meilleur composant pour vos exigences de conception.
Texas Instruments
PCA9557D - 8-Bit I2C/SMBus I/O Expander with Reset | TI (Tape & Reel)
PCA9557D ✗ Fin de vieComparaison des spécifications
| Paramètre | P82B96P | PCA9557D |
|---|---|---|
| Marque | Texas Instruments | Texas Instruments |
| Catégorie | Interface ICs | Interface ICs |
| Statut du cycle de vie | Actif | Fin de vie |
| Product Type | 2-bit bidirectional I2C/SMBus buffer and cable extender | — |
| Number of Channels | 2 channels | — |
| Operating Supply Voltage Range | 2 V to 15 V | — |
| Maximum Stated Operating Frequency | 400 kHz | — |
| Bus Compatibility | I2C and SMBus | — |
| Data Direction | Bidirectional | — |
| Interface Architecture | Non-latching bidirectional bus interface | — |
| Direction Control Input | None | — |
| Supported Logic Levels | 2 V to 15 V | — |
| Sx/Sy Same-Node Connection | Not supported | — |
| Boîtier | 8-pin PDIP | 16-SOIC (DR, 7.5 mil pitch) |
| Type de montage | Through-hole | Surface Mount |
| Plage de température de fonctionnement | [DATA_NEEDED: operating temperature range] | — |
| Courant de repos | [DATA_NEEDED: quiescent current] | — |
| Maximum Bus Capacitance | [DATA_NEEDED: maximum bus capacitance] | — |
| Propagation Delay | [DATA_NEEDED: propagation delay] | — |
| Input Logic High Voltage | [DATA_NEEDED: input logic-high voltage] | — |
| Input Logic Low Voltage | [DATA_NEEDED: input logic-low voltage] | — |
| Output Low-Level Voltage | [DATA_NEEDED: output low-level voltage] | — |
| Courant d'alimentation | [DATA_NEEDED: supply current] | — |
| Statut RoHS | [DATA_NEEDED: RoHS status] | Compliant |
| REACH Status | [DATA_NEEDED: REACH status] | — |
| Lead-Free Status | [DATA_NEEDED: lead-free status] | — |
| Number of I/O Bits | — | 8 |
| Interface | — | I2C, SMBus |
| Bus Frequency (Max) | — | 400 kHz |
| Supply Voltage (VCC) | — | 2.3 V to 5.5 V |
| Température de fonctionnement | — | -40 C to +85 C |
| Standby Current (Max) | — | 1 uA |
| Output Drive Current per Bit | — | [DATA_NEEDED: per-bit source/sink mA rating] |
| I/O Voltage Tolerance | — | 5.5 V tolerant |
| Reset Input | — | Active-low hardware RESET + software reset (general call) |
| Interrupt Output (INT) | — | Yes, open-drain |
| Slave Address Pins | — | A0, A1, A2 (3 pins, 8 addresses within family) |
| Niveau MSL | — | 1 (unlimited floor life) |
| Lead-Free | — | Yes |
| Configuration Registers | — | Input/output direction registers, polarity inversion |