PN7160B1HN vs PN7160A1HN Vergleich
Detaillierter Direktvergleich von PN7160B1HN von NXP Semiconductors und PN7160A1HN von NXP Semiconductors. Vergleichen Sie die wichtigsten Spezifikationen, elektrischen Parameter, Gehäuse, Lebenszyklusstatus, Preise und Verfügbarkeit, um das beste Bauteil für Ihre Designanforderungen zu ermitteln.
Spezifikationsvergleich
| Parameter | PN7160B1HN | PN7160A1HN |
|---|---|---|
| Marke | NXP Semiconductors | NXP Semiconductors |
| Kategorie | RF Transceivers | RF Modules |
| Lebenszyklusstatus | Aktiv | Aktiv |
| Lagerstatus | In Stock | In Stock |
| Stückpreis (USD) | $3,75 | $2,15 |
| Funktion | NFC Plug and Play Controller | — |
| Schnittstelle | NCI over SPI | — |
| Operating Frequency | 13.56 MHz | 13.56 MHz |
| Supported Standards | FeliCa, ISO 14443, ISO 15693, MIFARE, NFC Forum | — |
| Host Interface Supply | 1.65 V to 1.95 V | — |
| RF/Analog Supply | 3 V to 3.6 V | — |
| Betriebstemperatur | -40 C to +85 C | -30 C to +85 C |
| Gehäuse | 40-VFQFN Exposed Pad | HVQFN-40 (6 x 6 x 0.85 mm) with Exposed Pad |
| Montageart | Surface Mount | Surface Mount |
| Integrated Firmware | Yes (NCI-compliant) | — |
| Reader/Writer Mode | Yes | — |
| Card Emulation Mode | Yes | — |
| Peer-to-Peer Mode | Yes | — |
| Host OS Support | Android, Linux, Windows | — |
| RoHS-Status | Compliant | Compliant |
| MSL-Level | 1 | — |
| Product Type | — | NFC Plug and Play Controller |
| Supported Protocols | — | FeliCa, ISO 14443, ISO 15693, MIFARE, NFC |
| Host Interface | — | I2C (default, hardware) / SPI (EEPROM-configurable) |
| NCI Version | — | NCI 2.0 (pre-loaded firmware) |
| Digital Supply Voltage | — | 1.65 V to 1.95 V (VDD) |
| Analog/RF Supply Voltage | — | 3.0 V to 3.6 V (VBAT, VBAT_PA) |
| I/O Supply Voltage | — | 1.65 V to 1.95 V (VDDIO) |
| I2C Address | — | 0x28 (7-bit) |
| RF Output Power | — | [DATA_NEEDED: TX output power dBm] |
| Antenna Pins | — | TX1, TX2 (differential); RX1, RX2 |
| Integrated MCU Core | — | ARM Cortex-M0 (ROM-resident NCI firmware) |
| Operating Modes | — | Reader/Writer, Card Emulation (P2P), Tag Detection |
| Modes of Operation | — | Active, Standby, Hard Power Down, Low-Power Polling |
| Peak Reflow Temperature | — | 260 C (per JEDEC J-STD-020) |
| Moisture Sensitivity Level | — | MSL 3 |