SI8273AB-IM vs UCC21530DWKR Vergleich

Detaillierter Direktvergleich von SI8273AB-IM von Skyworks Solutions und UCC21530DWKR von Texas Instruments. Vergleichen Sie die wichtigsten Spezifikationen, elektrischen Parameter, Gehäuse, Lebenszyklusstatus, Preise und Verfügbarkeit, um das beste Bauteil für Ihre Designanforderungen zu ermitteln.

Skyworks Solutions
SI8273AB-IM SI8273AB-IM - 4A ISOdriver Isolated Gate Driver | Skyworks

SI8273AB-IM - 4A ISOdriver Isolated Gate Driver | Skyworks

SI8273AB-IM ✓ Aktiv
Texas Instruments
UCC21530DWKR UCC21530DWKR - 4A/6A Dual-Channel Isolated Gate Driver | TI

UCC21530DWKR - 4A/6A Dual-Channel Isolated Gate Driver | TI

UCC21530DWKR ✓ Aktiv

Spezifikationsvergleich

Parameter SI8273AB-IM UCC21530DWKR
Marke Skyworks Solutions Texas Instruments
Kategorie Power MOSFET Drivers Power MOSFET Drivers
Lebenszyklusstatus Aktiv Aktiv
Lagerstatus In Stock In Stock
Stückpreis (USD) $1,62 $1,95
Product Type Isolated Gate Driver (ISOdriver) —
Isolation Technology Silicon RF capacitive isolation —
Isolation Withstand Voltage 2500 Vrms (per UL1577) —
Number of Channels 2 (High-Side / Low-Side) 2
Peak Output Current 4 A source/sink —
Input Configuration Single PWM or dual digital inputs (VIA, VIB) —
Propagation Delay 60 ns (typical) [DATA_NEEDED: propagation delay in ns]
Input Supply Voltage (VDD) 2.5 V to 5.5 V —
UVLO Threshold 3 V (programmable on some variants) —
Ausgangskonfiguration Independent HS and LS drivers —
Common-Mode Transient Immunity (CMTI) Industry-leading (per datasheet) >=125 V/ns (minimum)
Betriebstemperaturbereich -40C to +125C -40C to +125C
Gehäuse 14-pin LGA (5x5 mm) 14-SOIC (DWK) with 3.3 mm channel spacing
Montageart Surface Mount Surface Mount
RoHS-Status Compliant Compliant
Driver Configuration — Half-Bridge (dual independent outputs)
Peak Source Current — 4 A
Peak Sink Current — 6 A
Isolation Voltage (RMS) — 5.7 kVRMS (reinforced, per UL 1577)
Channel-to-Channel Spacing — 3.3 mm
Maximum Switching Frequency — 5 MHz
VDD Supply Range (logic side) — 3 V to 5.5 V
VDDA / VDDB Range (drive side) — 8 V to 18 V (up to 25 V per TI part details)
Dead-Time Control — Programmable via DT pin resistor
Enable-Pin — Yes (EN, active-high; pulls LOW to disable both outputs)
Input Logic Compatibility — CMOS / TTL
Approximate Datasheet Length — 47 pages (per third-party datasheet archive)

Datenblätter & Ressourcen

Alle Produkte durchsuchen BOM erstellen Angebot anfordern