SN65HVD70D vs SN65HVD76D Vergleich

Detaillierter Direktvergleich von SN65HVD70D von Texas Instruments und SN65HVD76D von Texas Instruments. Vergleichen Sie die wichtigsten Spezifikationen, elektrischen Parameter, Gehäuse, Lebenszyklusstatus, Preise und Verfügbarkeit, um das beste Bauteil für Ihre Designanforderungen zu ermitteln.

Texas Instruments
SN65HVD70D SN65HVD70D - 3.3V Full-Duplex RS-485 Transceiver | TI

SN65HVD70D - 3.3V Full-Duplex RS-485 Transceiver | TI

SN65HVD70D ✓ Aktiv
Texas Instruments
SN65HVD76D SN65HVD76D - 50Mbps Full-Duplex RS-485 | Texas Instruments

SN65HVD76D - 50Mbps Full-Duplex RS-485 | Texas Instruments

SN65HVD76D ✓ Aktiv

Spezifikationsvergleich

Parameter SN65HVD70D SN65HVD76D
Marke Texas Instruments Texas Instruments
Kategorie Interface ICs Interface ICs
Lebenszyklusstatus Aktiv Aktiv
Product Type Full-duplex RS-485 transceiver Full-duplex RS-485 transceiver
Versorgungsspannung 3.3 V 3.3 V
Maximum Data Rate 400 kbps 50 Mbps
Transceiver Configuration 1/1 full-duplex transceiver —
Driver Enable Yes Active high
Receiver Enable Yes Active low
IEC ESD Protection 12 kV contact discharge —
Human Body Model ESD Protection >30 kV —
Receiver Hysteresis Large receiver hysteresis 70 mV
Operating Voltage Range [DATA_NEEDED: operating voltage range] —
Supply Voltage Range [DATA_NEEDED: minimum and maximum supply voltage] 3 V to 3.6 V
Driver Output Current [DATA_NEEDED: driver output current] —
Receiver Input Sensitivity [DATA_NEEDED: receiver input sensitivity] —
Common-Mode Voltage Range [DATA_NEEDED: common-mode voltage range] —
Propagation Delay [DATA_NEEDED: driver and receiver propagation delay] —
Betriebstemperaturbereich [DATA_NEEDED: operating temperature range] -40 C to 125 C
Gehäuse 14-pin SOIC (D) 14-pin SOIC (D)
Montageart Surface mount Surface mount
RoHS-Status [DATA_NEEDED: RoHS status] [DATA_NEEDED: RoHS status]
REACH Status [DATA_NEEDED: REACH status] [DATA_NEEDED: REACH status]
Number of Drivers/Receivers — 1/1
Duplex Mode — Full-duplex
Supported Protocols — RS-485 and RS-422
Receiver Unit Load — 1/8 unit load
Maximum Bus Nodes — 256 nodes
IEC Contact Discharge Protection — Greater than 12 kV
Human Body Model Protection — Greater than 30 kV
IEC Fast Transient Burst Protection — Greater than 4 kV
Low Standby Current — Less than 5 uA with driver and receiver disabled

Datenblätter & Ressourcen

Alle Produkte durchsuchen BOM erstellen Angebot anfordern