SN65HVD70D vs SN65HVD76D Comparação
Comparação detalhada lado a lado de SN65HVD70D por Texas Instruments e SN65HVD76D por Texas Instruments. Compare especificações principais, parâmetros elétricos, encapsulamento, status do ciclo de vida, preços e disponibilidade para determinar o melhor componente para os requisitos do seu projeto.
Comparação de especificações
| Parâmetro | SN65HVD70D | SN65HVD76D |
|---|---|---|
| Marca | Texas Instruments | Texas Instruments |
| Categoria | Interface ICs | Interface ICs |
| Status do ciclo de vida | Ativo | Ativo |
| Product Type | Full-duplex RS-485 transceiver | Full-duplex RS-485 transceiver |
| Tensão de alimentação | 3.3 V | 3.3 V |
| Maximum Data Rate | 400 kbps | 50 Mbps |
| Transceiver Configuration | 1/1 full-duplex transceiver | — |
| Driver Enable | Yes | Active high |
| Receiver Enable | Yes | Active low |
| IEC ESD Protection | 12 kV contact discharge | — |
| Human Body Model ESD Protection | >30 kV | — |
| Receiver Hysteresis | Large receiver hysteresis | 70 mV |
| Operating Voltage Range | [DATA_NEEDED: operating voltage range] | — |
| Supply Voltage Range | [DATA_NEEDED: minimum and maximum supply voltage] | 3 V to 3.6 V |
| Driver Output Current | [DATA_NEEDED: driver output current] | — |
| Receiver Input Sensitivity | [DATA_NEEDED: receiver input sensitivity] | — |
| Common-Mode Voltage Range | [DATA_NEEDED: common-mode voltage range] | — |
| Propagation Delay | [DATA_NEEDED: driver and receiver propagation delay] | — |
| Faixa de temperatura de operação | [DATA_NEEDED: operating temperature range] | -40 C to 125 C |
| Encapsulamento | 14-pin SOIC (D) | 14-pin SOIC (D) |
| Tipo de montagem | Surface mount | Surface mount |
| Status RoHS | [DATA_NEEDED: RoHS status] | [DATA_NEEDED: RoHS status] |
| REACH Status | [DATA_NEEDED: REACH status] | [DATA_NEEDED: REACH status] |
| Number of Drivers/Receivers | — | 1/1 |
| Duplex Mode | — | Full-duplex |
| Supported Protocols | — | RS-485 and RS-422 |
| Receiver Unit Load | — | 1/8 unit load |
| Maximum Bus Nodes | — | 256 nodes |
| IEC Contact Discharge Protection | — | Greater than 12 kV |
| Human Body Model Protection | — | Greater than 30 kV |
| IEC Fast Transient Burst Protection | — | Greater than 4 kV |
| Low Standby Current | — | Less than 5 uA with driver and receiver disabled |