SN65HVD70DGSR vs MAX3485ESA+ Vergleich
Detaillierter Direktvergleich von SN65HVD70DGSR von Texas Instruments und MAX3485ESA+ von Analog Devices. Vergleichen Sie die wichtigsten Spezifikationen, elektrischen Parameter, Gehäuse, Lebenszyklusstatus, Preise und Verfügbarkeit, um das beste Bauteil für Ihre Designanforderungen zu ermitteln.
Texas Instruments
SN65HVD70DGSR - 3.3V Full-Duplex RS-485 400kbps Transceiver, 10-VSSOP | Texas Instruments
SN65HVD70DGSR ✓ Aktiv
Spezifikationsvergleich
| Parameter | SN65HVD70DGSR | MAX3485ESA+ |
|---|---|---|
| Marke | Texas Instruments | Analog Devices |
| Kategorie | Interface ICs | Interface ICs |
| Lebenszyklusstatus | Aktiv | Aktiv |
| Lagerstatus | In Stock | In Stock |
| Stückpreis (USD) | $1,55 | $1,45 |
| Product Type | RS-485 / RS-422 Transceiver | RS-485/RS-422 transceiver |
| Protocol | RS-422, RS-485 | — |
| Number of Drivers/Receivers | 1/1 | — |
| Duplex | Full | — |
| Supply Voltage (VCC) | 3.0 V to 3.6 V | — |
| Datenrate | Up to 400 kbps | — |
| IEC ESD Protection (Contact) | ±12 kV (IEC 61000-4-2) | — |
| HBM ESD Protection (Bus pins) | ±30 kV (HBM) | — |
| Receiver Hysteresis | 50 mV (typical) | — |
| Common-Mode Range | -7 V to +12 V | — |
| Unit Load | 1/8 unit load (up to 256 nodes) | — |
| Driver Enable | Active-high | — |
| Receiver Enable | Active-low | — |
| Standby Current | < 5 µA (both disabled) | — |
| Betriebstemperatur | -40 °C to +125 °C | [DATA_NEEDED: operating temperature range] |
| Gehäuse | 10-pin VSSOP (DGS) with PowerPAD | 8-pin SOIC |
| Montageart | Surface Mount | Surface mount |
| RoHS-Status | Compliant | [DATA_NEEDED: RoHS status] |
| Versorgungsspannung | — | 3.3 V |
| Maximum Data Rate | — | 10 Mbps |
| Driver Count | — | 1 |
| Receiver Count | — | 1 |
| Supported Standards | — | RS-485 and RS-422 |
| Driver Architecture | — | Slew-rate-limited true transceiver |
| Power Class | — | Low-power transceiver |
| Production Status | — | PRODUCTION |
| ESD Protection | — | [DATA_NEEDED: ESD protection rating] |
| Versorgungsstrom | — | [DATA_NEEDED: typical and maximum supply current] |
| Driver Output Current | — | [DATA_NEEDED: driver output current] |
| Receiver Input Impedance | — | [DATA_NEEDED: receiver input impedance] |
| Common-Mode Voltage Range | — | [DATA_NEEDED: common-mode voltage range] |
| REACH Status | — | [DATA_NEEDED: REACH status] |