SN65HVD70DGSR vs MAX3485ESA+ Comparaison
Comparaison détaillée côte à côte de SN65HVD70DGSR par Texas Instruments et MAX3485ESA+ par Analog Devices. Comparez les spécifications clés, les paramètres électriques, le conditionnement, le statut de cycle de vie, les prix et la disponibilité pour déterminer le meilleur composant pour vos exigences de conception.
Texas Instruments
SN65HVD70DGSR - 3.3V Full-Duplex RS-485 400kbps Transceiver, 10-VSSOP | Texas Instruments
SN65HVD70DGSR ✓ Actif
Comparaison des spécifications
| Paramètre | SN65HVD70DGSR | MAX3485ESA+ |
|---|---|---|
| Marque | Texas Instruments | Analog Devices |
| Catégorie | Interface ICs | Interface ICs |
| Statut du cycle de vie | Actif | Actif |
| Statut du stock | In Stock | In Stock |
| Prix unitaire (USD) | $1,55 | $1,45 |
| Product Type | RS-485 / RS-422 Transceiver | RS-485/RS-422 transceiver |
| Protocol | RS-422, RS-485 | — |
| Number of Drivers/Receivers | 1/1 | — |
| Duplex | Full | — |
| Supply Voltage (VCC) | 3.0 V to 3.6 V | — |
| Débit de données | Up to 400 kbps | — |
| IEC ESD Protection (Contact) | ±12 kV (IEC 61000-4-2) | — |
| HBM ESD Protection (Bus pins) | ±30 kV (HBM) | — |
| Receiver Hysteresis | 50 mV (typical) | — |
| Common-Mode Range | -7 V to +12 V | — |
| Unit Load | 1/8 unit load (up to 256 nodes) | — |
| Driver Enable | Active-high | — |
| Receiver Enable | Active-low | — |
| Standby Current | < 5 µA (both disabled) | — |
| Température de fonctionnement | -40 °C to +125 °C | [DATA_NEEDED: operating temperature range] |
| Boîtier | 10-pin VSSOP (DGS) with PowerPAD | 8-pin SOIC |
| Type de montage | Surface Mount | Surface mount |
| Statut RoHS | Compliant | [DATA_NEEDED: RoHS status] |
| Tension d'alimentation | — | 3.3 V |
| Maximum Data Rate | — | 10 Mbps |
| Driver Count | — | 1 |
| Receiver Count | — | 1 |
| Supported Standards | — | RS-485 and RS-422 |
| Driver Architecture | — | Slew-rate-limited true transceiver |
| Power Class | — | Low-power transceiver |
| Production Status | — | PRODUCTION |
| ESD Protection | — | [DATA_NEEDED: ESD protection rating] |
| Courant d'alimentation | — | [DATA_NEEDED: typical and maximum supply current] |
| Driver Output Current | — | [DATA_NEEDED: driver output current] |
| Receiver Input Impedance | — | [DATA_NEEDED: receiver input impedance] |
| Common-Mode Voltage Range | — | [DATA_NEEDED: common-mode voltage range] |
| REACH Status | — | [DATA_NEEDED: REACH status] |