SN65HVD73DGSR vs SN65HVD73DGS Vergleich
Detaillierter Direktvergleich von SN65HVD73DGSR von Texas Instruments und SN65HVD73DGS von Texas Instruments. Vergleichen Sie die wichtigsten Spezifikationen, elektrischen Parameter, Gehäuse, Lebenszyklusstatus, Preise und Verfügbarkeit, um das beste Bauteil für Ihre Designanforderungen zu ermitteln.
Texas Instruments
SN65HVD73DGSR - 3.3V Full-Duplex RS-485, 20Mbps, 12kV ESD | TI
SN65HVD73DGSR ✓ AktivTexas Instruments
SN65HVD73DGS - 3.3V Full-Duplex RS-485 20Mbps | Texas Instruments
SN65HVD73DGS ✓ AktivSpezifikationsvergleich
| Parameter | SN65HVD73DGSR | SN65HVD73DGS |
|---|---|---|
| Marke | Texas Instruments | Texas Instruments |
| Kategorie | Interface ICs | Interface ICs |
| Lebenszyklusstatus | Aktiv | Aktiv |
| Lagerstatus | In Stock | In Stock |
| Stückpreis (USD) | $1,28 | $1,85 |
| Part Number | SN65HVD73DGSR | — |
| Manufacturer | Texas Instruments | — |
| Product Type | RS-485 / RS-422 Full-Duplex Transceiver | — |
| Supply Voltage (VCC) | 3.0 V to 3.6 V | 3 V to 3.6 V |
| Data Rate (max) | 20 Mbps | — |
| Number of Drivers / Receivers | 1 / 1 | — |
| Duplex | Full | Full |
| Receiver Hysteresis | [DATA_NEEDED: typical receiver hysteresis in mV] | — |
| Common-Mode Voltage Range | [DATA_NEEDED: -7 V to +12 V typical] | -7 V to +12 V |
| ESD Protection - HBM (bus pins) | ±30 kV | — |
| ESD Protection - IEC 61000-4-2 Contact (bus pins) | ±12 kV | — |
| Unit Load | 1/8 (up to 256 nodes) | — |
| Betriebstemperaturbereich | -40 °C to +125 °C | — |
| Gehäuse | VSSOP-10 (DGS), 3.00 mm × 3.00 mm, PowerPAD | 10-VSSOP (DGS) 3.0 mm × 3.0 mm |
| Montageart | Surface Mount | Surface Mount |
| RoHS-Status | Compliant | Compliant |
| MSL-Level | [DATA_NEEDED: MSL rating per JEDEC J-STD-020] | 2 |
| Enable Pins | DE (driver enable, active-high); RE (receiver enable, active-low) | — |
| Protocol | — | RS-422, RS-485 |
| Number of Drivers/Receivers | — | 1/1 |
| Datenrate | — | 20 Mbps (max) |
| ESD Protection (Bus Pins) | — | 12 kV IEC 61000-4-2 contact discharge |
| Receiver Input Impedance | — | 1/8 unit load (up to 256 nodes) |
| Driver Enable | — | Yes, active-high (DE pin) |
| Receiver Enable | — | Yes, active-low (RE pin) |
| Betriebstemperatur | — | -40 °C to +125 °C |