SN65HVD73DGSR vs SN65HVD73DGS Comparación
Comparación detallada lado a lado de SN65HVD73DGSR por Texas Instruments y SN65HVD73DGS por Texas Instruments. Compare las especificaciones clave, los parámetros eléctricos, el encapsulado, el estado del ciclo de vida, los precios y la disponibilidad para determinar el mejor componente para los requisitos de su diseño.
Texas Instruments
SN65HVD73DGSR - 3.3V Full-Duplex RS-485, 20Mbps, 12kV ESD | TI
SN65HVD73DGSR ✓ ActivoTexas Instruments
SN65HVD73DGS - 3.3V Full-Duplex RS-485 20Mbps | Texas Instruments
SN65HVD73DGS ✓ ActivoComparación de especificaciones
| Parámetro | SN65HVD73DGSR | SN65HVD73DGS |
|---|---|---|
| Marca | Texas Instruments | Texas Instruments |
| Categoría | Interface ICs | Interface ICs |
| Estado del ciclo de vida | Activo | Activo |
| Estado del stock | In Stock | In Stock |
| Precio unitario (USD) | $1,28 | $1,85 |
| Part Number | SN65HVD73DGSR | — |
| Manufacturer | Texas Instruments | — |
| Product Type | RS-485 / RS-422 Full-Duplex Transceiver | — |
| Supply Voltage (VCC) | 3.0 V to 3.6 V | 3 V to 3.6 V |
| Data Rate (max) | 20 Mbps | — |
| Number of Drivers / Receivers | 1 / 1 | — |
| Duplex | Full | Full |
| Receiver Hysteresis | [DATA_NEEDED: typical receiver hysteresis in mV] | — |
| Common-Mode Voltage Range | [DATA_NEEDED: -7 V to +12 V typical] | -7 V to +12 V |
| ESD Protection - HBM (bus pins) | ±30 kV | — |
| ESD Protection - IEC 61000-4-2 Contact (bus pins) | ±12 kV | — |
| Unit Load | 1/8 (up to 256 nodes) | — |
| Rango de temperatura de funcionamiento | -40 °C to +125 °C | — |
| Encapsulado | VSSOP-10 (DGS), 3.00 mm × 3.00 mm, PowerPAD | 10-VSSOP (DGS) 3.0 mm × 3.0 mm |
| Tipo de montaje | Surface Mount | Surface Mount |
| Estado RoHS | Compliant | Compliant |
| Nivel MSL | [DATA_NEEDED: MSL rating per JEDEC J-STD-020] | 2 |
| Enable Pins | DE (driver enable, active-high); RE (receiver enable, active-low) | — |
| Protocol | — | RS-422, RS-485 |
| Number of Drivers/Receivers | — | 1/1 |
| Velocidad de datos | — | 20 Mbps (max) |
| ESD Protection (Bus Pins) | — | 12 kV IEC 61000-4-2 contact discharge |
| Receiver Input Impedance | — | 1/8 unit load (up to 256 nodes) |
| Driver Enable | — | Yes, active-high (DE pin) |
| Receiver Enable | — | Yes, active-low (RE pin) |
| Temperatura de funcionamiento | — | -40 °C to +125 °C |