SN65HVD78D vs SN75174DW Vergleich
Detaillierter Direktvergleich von SN65HVD78D von Texas Instruments und SN75174DW von Texas Instruments. Vergleichen Sie die wichtigsten Spezifikationen, elektrischen Parameter, Gehäuse, Lebenszyklusstatus, Preise und Verfügbarkeit, um das beste Bauteil für Ihre Designanforderungen zu ermitteln.
Spezifikationsvergleich
| Parameter | SN65HVD78D | SN75174DW |
|---|---|---|
| Marke | Texas Instruments | Texas Instruments |
| Kategorie | USB Interface ICs | USB Interface ICs |
| Lebenszyklusstatus | Aktiv | Aktiv |
| Product Type | 3.3 V half-duplex RS-485 transceiver | — |
| Supply Voltage Range | 3 V to 3.6 V | 4.75 V to 5.25 V |
| Nominal Supply Voltage | 3.3 V | — |
| Maximum Signaling Rate | 50 Mbps | — |
| Driver Count | 1 | — |
| Receiver Count | 1 | — |
| Duplex Mode | Half-duplex | — |
| Bus Standard | RS-485 | — |
| Gehäuse | 8-pin SOIC | 20-pin SOIC |
| Betriebstemperaturbereich | -40°C to +125°C | [DATA_NEEDED: operating temperature range] |
| Montageart | Surface mount | Surface mount |
| ESD Protection | Human Body Model and IEC Contact Discharge on bus pins | — |
| IEC Contact Discharge Protection | ±12 kV | — |
| Fault Protection Voltage | -13 V to +16.5 V | — |
| RoHS-Status | [DATA_NEEDED: RoHS compliance status] | [DATA_NEEDED: RoHS status] |
| REACH Status | [DATA_NEEDED: REACH compliance status] | [DATA_NEEDED: REACH status] |
| AEC-Q100 Qualification | [DATA_NEEDED: AEC-Q100 qualification status] | [DATA_NEEDED: AEC-Q100 qualification] |
| Device Type | — | Quadruple differential line driver |
| Number of Drivers | — | 4 |
| Logic Direction | — | 4/0 driver |
| Output State | — | 3-state |
| Supported Standards | — | ANSI EIA/TIA-422-B, RS-485, and ITU Recommendation V.11 |
| Maximum Data Rate | — | 4 megabaud |
| Output Common-Mode Range | — | Wide positive and negative range; exact limits not provided in the verified data |
| Topologie | — | Balanced multipoint bus |
| Package Designation | — | 20-SOIC |
| Enable Control | — | Common driver enable |
| MSL | — | [DATA_NEEDED: moisture sensitivity level] |
| Lead Finish | — | [DATA_NEEDED: lead finish] |
| Production Status | — | SN75174 listed as an active product on TI; SN75174DW listed as obsolete by TI carrier-option page |