SN65HVD78D vs SN75174DW तुलना
विस्तृत दोनों ओर की तुलना SN65HVD78D द्वारा Texas Instruments और SN75174DW द्वारा Texas Instruments. मुख्य विशेषताओं, इलेक्ट्रिकल पैरामीटर, पैकेजिंग, चक्र स्थिति, मूल्यांकन और उपलब्धता को तुलना करके अपनी डिजाइन की आवश्यकताओं के लिए सबसे अच्छा घटक निर्धारित करें。
विशेषता तुलना
| पैरामीटर | SN65HVD78D | SN75174DW |
|---|---|---|
| ब्रांड | Texas Instruments | Texas Instruments |
| श्रेणी | USB Interface ICs | USB Interface ICs |
| लाइफसाइकिल स्थिति | सक्रिय | सक्रिय |
| Product Type | 3.3 V half-duplex RS-485 transceiver | — |
| Supply Voltage Range | 3 V to 3.6 V | 4.75 V to 5.25 V |
| Nominal Supply Voltage | 3.3 V | — |
| Maximum Signaling Rate | 50 Mbps | — |
| Driver Count | 1 | — |
| Receiver Count | 1 | — |
| Duplex Mode | Half-duplex | — |
| Bus Standard | RS-485 | — |
| पैकेज | 8-pin SOIC | 20-pin SOIC |
| ऑपरेटिंग तापमान रेंज | -40°C to +125°C | [DATA_NEEDED: operating temperature range] |
| माउंटिंग प्रकार | Surface mount | Surface mount |
| ESD Protection | Human Body Model and IEC Contact Discharge on bus pins | — |
| IEC Contact Discharge Protection | ±12 kV | — |
| Fault Protection Voltage | -13 V to +16.5 V | — |
| RoHS स्थिति | [DATA_NEEDED: RoHS compliance status] | [DATA_NEEDED: RoHS status] |
| REACH Status | [DATA_NEEDED: REACH compliance status] | [DATA_NEEDED: REACH status] |
| AEC-Q100 Qualification | [DATA_NEEDED: AEC-Q100 qualification status] | [DATA_NEEDED: AEC-Q100 qualification] |
| Device Type | — | Quadruple differential line driver |
| Number of Drivers | — | 4 |
| Logic Direction | — | 4/0 driver |
| Output State | — | 3-state |
| Supported Standards | — | ANSI EIA/TIA-422-B, RS-485, and ITU Recommendation V.11 |
| Maximum Data Rate | — | 4 megabaud |
| Output Common-Mode Range | — | Wide positive and negative range; exact limits not provided in the verified data |
| टोपोलॉजी | — | Balanced multipoint bus |
| Package Designation | — | 20-SOIC |
| Enable Control | — | Common driver enable |
| MSL | — | [DATA_NEEDED: moisture sensitivity level] |
| Lead Finish | — | [DATA_NEEDED: lead finish] |
| Production Status | — | SN75174 listed as an active product on TI; SN75174DW listed as obsolete by TI carrier-option page |