SN75176BD vs ADM242AR Vergleich
Detaillierter Direktvergleich von SN75176BD von Texas Instruments und ADM242AR von Analog Devices. Vergleichen Sie die wichtigsten Spezifikationen, elektrischen Parameter, Gehäuse, Lebenszyklusstatus, Preise und Verfügbarkeit, um das beste Bauteil für Ihre Designanforderungen zu ermitteln.
Spezifikationsvergleich
| Parameter | SN75176BD | ADM242AR |
|---|---|---|
| Marke | Texas Instruments | Analog Devices |
| Kategorie | Interface ICs | Interface ICs |
| Lebenszyklusstatus | Aktiv | Aktiv |
| Product Type | Differential bus transceiver | CMOS RS-232 transceiver |
| Versorgungsspannung | 5 V | 4.5 V to 5.5 V |
| Supported Standards | TIA/EIA-422-B and TIA/EIA-485-A | — |
| ITU Recommendations | V.11 and X.27 | — |
| Communication Mode | Bidirectional | — |
| Bus Architecture | Multipoint transmission | — |
| Transmission Line Type | Balanced transmission lines | — |
| Driver Output State | 3-state | — |
| Receiver Output State | 3-state | — |
| Betriebstemperaturbereich | 0 °C to 70 °C | — |
| Gehäuse | SOIC (D), 8 pins | SOIC-18 |
| Montageart | Surface mount | Surface mount |
| Pin-Anzahl | 8 pins | — |
| Manufacturer | Texas Instruments | — |
| RoHS-Status | [DATA_NEEDED: RoHS status] | [DATA_NEEDED: RoHS status] |
| REACH Status | [DATA_NEEDED: REACH status] | [DATA_NEEDED: REACH status] |
| Automotive Qualification | [DATA_NEEDED: AEC-Q100 qualification] | — |
| Maximum Data Rate | [DATA_NEEDED: maximum data rate] | 200 kbps |
| Input and Output Electrical Limits | [DATA_NEEDED: input and output electrical limits] | — |
| Propagation Delay | [DATA_NEEDED: propagation delay] | — |
| Ruhestrom | [DATA_NEEDED: quiescent current] | — |
| Driver Count | — | 2 |
| Receiver Count | — | 2 |
| Nominal Supply | — | 5 V |
| External Charge-Pump Capacitor | — | 0.1 µF |
| Betriebstemperatur | — | -40°C to +85°C |
| Driver and Receiver Configuration | — | 2/2 full RS-232 transceiver |
| Logic Compatibility | — | CMOS RS-232 |
| Charge-Pump Architecture | — | On-chip charge pump |
| RS-232 Level Generation | — | Bipolar levels generated from 5 V supply |
| Supply Type | — | Single supply |
| Lead-Free Status | — | [DATA_NEEDED: lead-free status] |