SN75176BD vs ADM242AR So sánh

So sánh chi tiết song song của SN75176BD bằng Texas Instruments và ADM242AR bằng Analog Devices. So sánh các thông số quan trọng, thông số điện tử, gói gọn, trạng thái vòng đời, giá cả và khả năng cung cấp để xác định linh kiện tốt nhất cho yêu cầu thiết kế của bạn.

Texas Instruments
SN75176BD SN75176BD - 8-Pin RS-485/RS-422 Transceiver | TI (Tape & Reel)

SN75176BD - 8-Pin RS-485/RS-422 Transceiver | TI (Tape & Reel)

SN75176BD ✓ Hoạt động
Analog Devices
ADM242AR ADM242AR - 200 kbps 2/2 RS-232 Transceiver | Analog Devices

ADM242AR - 200 kbps 2/2 RS-232 Transceiver | Analog Devices

ADM242AR ✓ Hoạt động

So sánh thông số kỹ thuật

Tham số SN75176BD ADM242AR
Thương hiệu Texas Instruments Analog Devices
Danh mục Interface ICs Interface ICs
Trạng thái vòng đời Hoạt động Hoạt động
Product Type Differential bus transceiver CMOS RS-232 transceiver
Điện áp cung cấp 5 V 4.5 V to 5.5 V
Supported Standards TIA/EIA-422-B and TIA/EIA-485-A —
ITU Recommendations V.11 and X.27 —
Communication Mode Bidirectional —
Bus Architecture Multipoint transmission —
Transmission Line Type Balanced transmission lines —
Driver Output State 3-state —
Receiver Output State 3-state —
Khoảng nhiệt độ hoạt động 0 °C to 70 °C —
Hộp SOIC (D), 8 pins SOIC-18
Kiểu lắp đặt Surface mount Surface mount
Số chân 8 pins —
Manufacturer Texas Instruments —
Trạng thái RoHS [DATA_NEEDED: RoHS status] [DATA_NEEDED: RoHS status]
REACH Status [DATA_NEEDED: REACH status] [DATA_NEEDED: REACH status]
Automotive Qualification [DATA_NEEDED: AEC-Q100 qualification] —
Maximum Data Rate [DATA_NEEDED: maximum data rate] 200 kbps
Input and Output Electrical Limits [DATA_NEEDED: input and output electrical limits] —
Propagation Delay [DATA_NEEDED: propagation delay] —
Điện áp yên tĩnh [DATA_NEEDED: quiescent current] —
Driver Count — 2
Receiver Count — 2
Nominal Supply — 5 V
External Charge-Pump Capacitor — 0.1 µF
Nhiệt độ hoạt động — -40°C to +85°C
Driver and Receiver Configuration — 2/2 full RS-232 transceiver
Logic Compatibility — CMOS RS-232
Charge-Pump Architecture — On-chip charge pump
RS-232 Level Generation — Bipolar levels generated from 5 V supply
Supply Type — Single supply
Lead-Free Status — [DATA_NEEDED: lead-free status]

Hồ sơ kỹ thuật & Tài nguyên

Xem tất cả sản phẩm Tạo BOM Yêu cầu báo giá