SP485CN-L vs SP485ECN-L Vergleich
Detaillierter Direktvergleich von SP485CN-L von MaxLinear und SP485ECN-L von MaxLinear. Vergleichen Sie die wichtigsten Spezifikationen, elektrischen Parameter, Gehäuse, Lebenszyklusstatus, Preise und Verfügbarkeit, um das beste Bauteil für Ihre Designanforderungen zu ermitteln.
MaxLinear
SP485ECN-L - 10Mbps Half-Duplex RS-485 Transceiver | MaxLinear (Tape & Reel)
SP485ECN-L ✓ AktivSpezifikationsvergleich
| Parameter | SP485CN-L | SP485ECN-L |
|---|---|---|
| Marke | MaxLinear | MaxLinear |
| Kategorie | Interface ICs | Interface ICs |
| Lebenszyklusstatus | Aktiv | Aktiv |
| Transceiver Type | Single transmitter/single receiver half-duplex transceiver | — |
| Supported Protocols | RS-422 and RS-485 | — |
| Maximum Data Rate | 5 Mbps | — |
| Supply Voltage Range | 4.75 V to 5.25 V | — |
| Logic and Bus Function | Bidifferential half-duplex serial interface | — |
| Architecture | BiCMOS | — |
| Power Class | Low-power operation | — |
| Driver Count | 1 | 1 driver |
| Receiver Count | 1 | 1 receiver |
| Gehäuse | 8-pin SOIC | 8-pin SOIC |
| Montageart | Surface Mount | Surface mount |
| Temperature Range | 0 C to 70 C | — |
| Bus Topology | Half-duplex differential bus | — |
| Signaling | Differential RS-422/RS-485 | — |
| EMI Behavior | [DATA_NEEDED: slew-rate and transient-emission details] | — |
| Receiver Sensitivity | [DATA_NEEDED: receiver sensitivity] | — |
| Propagation Delay | [DATA_NEEDED: propagation delay] | — |
| Ruhestrom | [DATA_NEEDED: quiescent current] | — |
| Driver Output Current | [DATA_NEEDED: driver output current] | — |
| Termination Requirement | [DATA_NEEDED: manufacturer termination and biasing guidance] | — |
| RoHS-Status | [DATA_NEEDED: RoHS status] | [DATA_NEEDED: RoHS status] |
| REACH Status | [DATA_NEEDED: REACH status] | [DATA_NEEDED: REACH status] |
| Lead-Free Status | [DATA_NEEDED: lead-free status] | Lead-free product marking is stated in the verified search data |
| AEC-Q100 Qualification | not_applicable | — |
| Product Type | — | RS-422/RS-485 half-duplex line transceiver |
| Versorgungsspannung | — | 5 V |
| Protocol Support | — | RS-422 and RS-485 |
| Duplex Mode | — | Half-duplex |
| Datenrate | — | 10 Mbps for SP485ECN-L; SP485 family supports up to 5 Mbps |
| Technology | — | BiCMOS |
| Package Width | — | 0.154 in (3.90 mm) |
| Packaging | — | Tape and reel |
| Human Body Model ESD Tolerance | — | Over ±15 kV |
| IEC 61000-4-2 Air Discharge ESD Tolerance | — | Over ±15 kV |
| Betriebstemperaturbereich | — | [DATA_NEEDED: operating temperature range] |
| Versorgungsstrom | — | [DATA_NEEDED: typical and maximum supply current] |
| Differential Input Voltage | — | [DATA_NEEDED: receiver input voltage range] |
| Output Current | — | [DATA_NEEDED: driver output current] |
| Shutdown Support | — | Not stated for SP485ECN-L in the verified data |