SP485CN-L vs SP485ECN-L Comparaison
Comparaison détaillée côte à côte de SP485CN-L par MaxLinear et SP485ECN-L par MaxLinear. Comparez les spécifications clés, les paramètres électriques, le conditionnement, le statut de cycle de vie, les prix et la disponibilité pour déterminer le meilleur composant pour vos exigences de conception.
MaxLinear
SP485ECN-L - 10Mbps Half-Duplex RS-485 Transceiver | MaxLinear (Tape & Reel)
SP485ECN-L ✓ ActifComparaison des spécifications
| Paramètre | SP485CN-L | SP485ECN-L |
|---|---|---|
| Marque | MaxLinear | MaxLinear |
| Catégorie | Interface ICs | Interface ICs |
| Statut du cycle de vie | Actif | Actif |
| Transceiver Type | Single transmitter/single receiver half-duplex transceiver | — |
| Supported Protocols | RS-422 and RS-485 | — |
| Maximum Data Rate | 5 Mbps | — |
| Supply Voltage Range | 4.75 V to 5.25 V | — |
| Logic and Bus Function | Bidifferential half-duplex serial interface | — |
| Architecture | BiCMOS | — |
| Power Class | Low-power operation | — |
| Driver Count | 1 | 1 driver |
| Receiver Count | 1 | 1 receiver |
| Boîtier | 8-pin SOIC | 8-pin SOIC |
| Type de montage | Surface Mount | Surface mount |
| Temperature Range | 0 C to 70 C | — |
| Bus Topology | Half-duplex differential bus | — |
| Signaling | Differential RS-422/RS-485 | — |
| EMI Behavior | [DATA_NEEDED: slew-rate and transient-emission details] | — |
| Receiver Sensitivity | [DATA_NEEDED: receiver sensitivity] | — |
| Propagation Delay | [DATA_NEEDED: propagation delay] | — |
| Courant de repos | [DATA_NEEDED: quiescent current] | — |
| Driver Output Current | [DATA_NEEDED: driver output current] | — |
| Termination Requirement | [DATA_NEEDED: manufacturer termination and biasing guidance] | — |
| Statut RoHS | [DATA_NEEDED: RoHS status] | [DATA_NEEDED: RoHS status] |
| REACH Status | [DATA_NEEDED: REACH status] | [DATA_NEEDED: REACH status] |
| Lead-Free Status | [DATA_NEEDED: lead-free status] | Lead-free product marking is stated in the verified search data |
| AEC-Q100 Qualification | not_applicable | — |
| Product Type | — | RS-422/RS-485 half-duplex line transceiver |
| Tension d'alimentation | — | 5 V |
| Protocol Support | — | RS-422 and RS-485 |
| Duplex Mode | — | Half-duplex |
| Débit de données | — | 10 Mbps for SP485ECN-L; SP485 family supports up to 5 Mbps |
| Technology | — | BiCMOS |
| Package Width | — | 0.154 in (3.90 mm) |
| Packaging | — | Tape and reel |
| Human Body Model ESD Tolerance | — | Over ±15 kV |
| IEC 61000-4-2 Air Discharge ESD Tolerance | — | Over ±15 kV |
| Plage de température de fonctionnement | — | [DATA_NEEDED: operating temperature range] |
| Courant d'alimentation | — | [DATA_NEEDED: typical and maximum supply current] |
| Differential Input Voltage | — | [DATA_NEEDED: receiver input voltage range] |
| Output Current | — | [DATA_NEEDED: driver output current] |
| Shutdown Support | — | Not stated for SP485ECN-L in the verified data |