SP485RCP-L vs SP485R Vergleich
Detaillierter Direktvergleich von SP485RCP-L von MaxLinear und SP485R von MaxLinear. Vergleichen Sie die wichtigsten Spezifikationen, elektrischen Parameter, Gehäuse, Lebenszyklusstatus, Preise und Verfügbarkeit, um das beste Bauteil für Ihre Designanforderungen zu ermitteln.
Spezifikationsvergleich
| Parameter | SP485RCP-L | SP485R |
|---|---|---|
| Marke | MaxLinear | MaxLinear |
| Kategorie | Interface ICs | Interface ICs |
| Lebenszyklusstatus | Aktiv | Aktiv |
| Product Type | RS-422/RS-485 transceiver | — |
| Transceiver Configuration | 1 driver / 1 receiver | — |
| Duplex Mode | Half-duplex | — |
| Supported Standards | RS-422 and RS-485 | — |
| Maximum Data Rate | 1000 kbps | — |
| Versorgungsspannung | 5.25 V | 4.75 V to 5.25 V |
| Betriebstemperaturbereich | 0°C to 70°C | — |
| Gehäuse | 8-pin PDIP | 8-pin narrow SOIC (SOIC-8) or 8-pin PDIP |
| Montageart | Through-hole | Surface Mount (SOIC) / Through-Hole (PDIP) |
| Driver Count | 1 | — |
| Receiver Count | 1 | — |
| Operating Supply Current | [DATA_NEEDED: operating supply current] | — |
| Ruhestrom | [DATA_NEEDED: quiescent current] | — |
| Abschaltstrom | [DATA_NEEDED: shutdown current] | — |
| Receiver Input Sensitivity | [DATA_NEEDED: receiver input sensitivity] | — |
| Common-Mode Voltage Range | [DATA_NEEDED: common-mode voltage range] | — |
| Driver Output Voltage | [DATA_NEEDED: driver output voltage] | — |
| ESD Protection | [DATA_NEEDED: ESD protection rating] | — |
| RoHS-Status | [DATA_NEEDED: RoHS status] | [DATA_NEEDED: rohs status] |
| REACH Status | [DATA_NEEDED: REACH status] | — |
| AEC-Q100 Qualification | [DATA_NEEDED: AEC-Q100 qualification] | — |
| Funktion | — | Transceiver |
| Protocol | — | RS-485 |
| Number of Drivers/Receivers | — | 1/1 |
| Duplex | — | Half |
| Receiver Hysteresis | — | [DATA_NEEDED: receiver hysteresis mV] |
| Datenrate | — | 5 Mbps |
| Betriebstemperatur | — | [DATA_NEEDED: operating temperature range C] |
| Receiver Input Impedance (RIN) | — | 120 kOhm minimum, 150 kOhm typical (1/10 unit load) |
| Bus Loading | — | 1/10 unit load (supports 400+ transceivers on bus) |
| Input Sensitivity | — | +/-200 mV |
| Common-Mode Input Voltage Range | — | -7 V to +12 V |
| Shutdown Mode | — | Yes |
| Pin-to-Pin Equivalent | — | SP485 (with higher RIN) |