SP485RCP-L vs SP485R 比較

詳細な並列比較: SP485RCP-L メーカー: MaxLinear および SP485R メーカー: MaxLinear。主要仕様、電気的特性、パッケージ、ライフサイクルステータス、価格、在庫状況を比較して、設計要件に最適な部品を判断してください。

MaxLinear
SP485RCP-L SP485RCP-L - 1 Mbps RS-485 Transceiver | MaxLinear

SP485RCP-L - 1 Mbps RS-485 Transceiver | MaxLinear

SP485RCP-L ✓ 生産中

仕様比較

パラメータ SP485RCP-L SP485R
ブランド MaxLinear MaxLinear
カテゴリ Interface ICs Interface ICs
ライフサイクル状態 有効 有効
Product Type RS-422/RS-485 transceiver —
Transceiver Configuration 1 driver / 1 receiver —
Duplex Mode Half-duplex —
Supported Standards RS-422 and RS-485 —
Maximum Data Rate 1000 kbps —
電源電圧 5.25 V 4.75 V to 5.25 V
動作温度範囲 0°C to 70°C —
パッケージ 8-pin PDIP 8-pin narrow SOIC (SOIC-8) or 8-pin PDIP
実装タイプ Through-hole Surface Mount (SOIC) / Through-Hole (PDIP)
Driver Count 1 —
Receiver Count 1 —
Operating Supply Current [DATA_NEEDED: operating supply current] —
静止電流 [DATA_NEEDED: quiescent current] —
シャットダウン電流 [DATA_NEEDED: shutdown current] —
Receiver Input Sensitivity [DATA_NEEDED: receiver input sensitivity] —
Common-Mode Voltage Range [DATA_NEEDED: common-mode voltage range] —
Driver Output Voltage [DATA_NEEDED: driver output voltage] —
ESD Protection [DATA_NEEDED: ESD protection rating] —
RoHS ステータス [DATA_NEEDED: RoHS status] [DATA_NEEDED: rohs status]
REACH Status [DATA_NEEDED: REACH status] —
AEC-Q100 Qualification [DATA_NEEDED: AEC-Q100 qualification] —
機能 — Transceiver
Protocol — RS-485
Number of Drivers/Receivers — 1/1
Duplex — Half
Receiver Hysteresis — [DATA_NEEDED: receiver hysteresis mV]
データレート — 5 Mbps
動作温度 — [DATA_NEEDED: operating temperature range C]
Receiver Input Impedance (RIN) — 120 kOhm minimum, 150 kOhm typical (1/10 unit load)
Bus Loading — 1/10 unit load (supports 400+ transceivers on bus)
Input Sensitivity — +/-200 mV
Common-Mode Input Voltage Range — -7 V to +12 V
Shutdown Mode — Yes
Pin-to-Pin Equivalent — SP485 (with higher RIN)

データシート&リソース

すべての製品を閲覧 BOMを作成 見積もり依頼