STM32F103Z vs STM32F103ZET6 Vergleich
Detaillierter Direktvergleich von STM32F103Z von STMicroelectronics und STM32F103ZET6 von STMicroelectronics. Vergleichen Sie die wichtigsten Spezifikationen, elektrischen Parameter, Gehäuse, Lebenszyklusstatus, Preise und Verfügbarkeit, um das beste Bauteil für Ihre Designanforderungen zu ermitteln.
STMicroelectronics
STM32F103Z - 72MHz Cortex-M3 MCU, 144-LQFP | STMicroelectronics
STM32F103Z ✓ AktivSTMicroelectronics
STM32F103ZET6 - 72MHz Cortex-M3 MCU 512KB Flash | STMicroelectronics
STM32F103ZET6 ✓ AktivSpezifikationsvergleich
| Parameter | STM32F103Z | STM32F103ZET6 |
|---|---|---|
| Marke | STMicroelectronics | STMicroelectronics |
| Kategorie | Microcontrollers | Microcontrollers |
| Lebenszyklusstatus | Aktiv | Aktiv |
| Lagerstatus | In Stock | In Stock |
| Stückpreis (USD) | $7,10 | $5,39 |
| Core | ARM Cortex-M3 | — |
| CPU Bit Width | 32-bit | — |
| Maximum CPU Clock | 72 MHz | — |
| Performance | 1.25 DMIPS/MHz | — |
| Flash Memory (ZE) | 512 KB | — |
| Flash Memory (ZD) | 384 KB | — |
| Flash Memory (ZC) | 256 KB | — |
| SRAM | 64 KB | — |
| Versorgungsspannung | 2.0 V to 3.6 V | — |
| Gehäuse | 144-LQFP (20x20 mm) | LQFP-144 (20 x 20 mm) |
| Betriebstemperatur | -40C to +85C (commercial) | -40C to +85C |
| GPIO Count | 112 | — |
| USB | USB 2.0 Full-Speed with on-chip PHY | — |
| CAN | 1x CAN 2.0B | — |
| ADC | 3x 12-bit, 1 µs conversion | — |
| Timers | 4x 16-bit general-purpose + advanced-control timers | Advanced-control, general-purpose and basic timers plus RTC |
| Communication Peripherals | USART, SPI, I2C, USB, CAN | — |
| RoHS-Status | Compliant | Compliant |
| Core Processor | — | ARM Cortex-M3 32-bit RISC |
| Maximale Taktfrequenz | — | 72 MHz |
| Core Performance | — | 1.25 DMIPS/MHz (Dhrystone 2.1) |
| Program Memory Size | — | 512 KB Flash |
| SRAM Size | — | 64 KB |
| Supply Voltage Range | — | 2.0 V to 3.6 V |
| Number of GPIOs | — | 112 |
| ADC Resolution | — | 12-bit, 3 ADCs, up to 21 channels |
| DAC Resolution | — | 12-bit, 2 channels |
| DMA Channels | — | 12 |
| Communication Interfaces | — | 5 USART, 3 SPI, 2 I2C, 1 CAN 2.0B, 1 USB 2.0 FS, 1 SDIO |
| Debug Interface | — | JTAG and Serial Wire Debug (SWD) |
| Boot Sources | — | Flash, system memory, or SRAM |
| Montageart | — | Surface Mount |