STM32F103Z vs STM32F103ZET6 Сравнение
Подробное сравнение бок о бок STM32F103Z от STMicroelectronics и STM32F103ZET6 от STMicroelectronics. Сравните ключевые характеристики, электрические параметры, упаковку, статус жизненного цикла, цены и наличие, чтобы выбрать лучший компонент для ваших требований.
STMicroelectronics
STM32F103Z - 72MHz Cortex-M3 MCU, 144-LQFP | STMicroelectronics
STM32F103Z ✓ АктивенSTMicroelectronics
STM32F103ZET6 - 72MHz Cortex-M3 MCU 512KB Flash | STMicroelectronics
STM32F103ZET6 ✓ АктивенСравнение характеристик
| Параметр | STM32F103Z | STM32F103ZET6 |
|---|---|---|
| Бренд | STMicroelectronics | STMicroelectronics |
| Категория | Microcontrollers | Microcontrollers |
| Статус жизненного цикла | Активен | Активен |
| Наличие | In Stock | In Stock |
| Цена за единицу (USD) | $7,10 | $5,39 |
| Core | ARM Cortex-M3 | — |
| CPU Bit Width | 32-bit | — |
| Maximum CPU Clock | 72 MHz | — |
| Performance | 1.25 DMIPS/MHz | — |
| Flash Memory (ZE) | 512 KB | — |
| Flash Memory (ZD) | 384 KB | — |
| Flash Memory (ZC) | 256 KB | — |
| SRAM | 64 KB | — |
| Напряжение питания | 2.0 V to 3.6 V | — |
| Корпус | 144-LQFP (20x20 mm) | LQFP-144 (20 x 20 mm) |
| Рабочая температура | -40C to +85C (commercial) | -40C to +85C |
| GPIO Count | 112 | — |
| USB | USB 2.0 Full-Speed with on-chip PHY | — |
| CAN | 1x CAN 2.0B | — |
| ADC | 3x 12-bit, 1 µs conversion | — |
| Timers | 4x 16-bit general-purpose + advanced-control timers | Advanced-control, general-purpose and basic timers plus RTC |
| Communication Peripherals | USART, SPI, I2C, USB, CAN | — |
| Статус RoHS | Compliant | Compliant |
| Core Processor | — | ARM Cortex-M3 32-bit RISC |
| Максимальная тактовая частота | — | 72 MHz |
| Core Performance | — | 1.25 DMIPS/MHz (Dhrystone 2.1) |
| Program Memory Size | — | 512 KB Flash |
| SRAM Size | — | 64 KB |
| Supply Voltage Range | — | 2.0 V to 3.6 V |
| Number of GPIOs | — | 112 |
| ADC Resolution | — | 12-bit, 3 ADCs, up to 21 channels |
| DAC Resolution | — | 12-bit, 2 channels |
| DMA Channels | — | 12 |
| Communication Interfaces | — | 5 USART, 3 SPI, 2 I2C, 1 CAN 2.0B, 1 USB 2.0 FS, 1 SDIO |
| Debug Interface | — | JTAG and Serial Wire Debug (SWD) |
| Boot Sources | — | Flash, system memory, or SRAM |
| Тип монтажа | — | Surface Mount |