STM32F107RCT6 vs STM32F107VCT6 Vergleich
Detaillierter Direktvergleich von STM32F107RCT6 von STMicroelectronics und STM32F107VCT6 von STMicroelectronics. Vergleichen Sie die wichtigsten Spezifikationen, elektrischen Parameter, Gehäuse, Lebenszyklusstatus, Preise und Verfügbarkeit, um das beste Bauteil für Ihre Designanforderungen zu ermitteln.
STMicroelectronics
STM32F107RCT6 - 256KB Flash Ethernet ARM MCU | STMicroelectronics
STM32F107RCT6 ✓ AktivSTMicroelectronics
STM32F107VCT6 - 256KB Flash 72MHz Cortex-M3 MCU | STMicroelectronics
STM32F107VCT6 ✓ AktivSpezifikationsvergleich
| Parameter | STM32F107RCT6 | STM32F107VCT6 |
|---|---|---|
| Marke | STMicroelectronics | STMicroelectronics |
| Kategorie | Microcontrollers | Microcontrollers |
| Lebenszyklusstatus | Aktiv | Aktiv |
| Lagerstatus | In Stock | In Stock |
| Stückpreis (USD) | $5,55 | $6,95 |
| Core | ARM Cortex-M3 32-bit RISC | — |
| Maximum CPU Clock | 72 MHz | — |
| Performance | 1.25 DMIPS/MHz (Dhrystone 2.1) | — |
| Flash Memory | 256 KB (4 x 64 KB, read-while-write) | 256 KB (256K x 8) |
| SRAM | 64 KB | 64 KB |
| Supply Voltage (VDD) | 2.0 V to 3.6 V | — |
| Betriebstemperatur | -40 C to +85 C (grade 6) | — |
| Gehäuse | LQFP-64, 10x10 mm, 0.5 mm pitch | 100-pin LQFP (14x14 mm) |
| Montageart | Surface Mount | Surface Mount |
| Ethernet | 10/100 MAC MAC (IEEE 802.3), MII/RMII | — |
| USB | USB 2.0 OTG full-speed (host/device) | — |
| CAN | 2 x CAN 2.0B active | — |
| ADC | 2 x 12-bit, 1 us conversion (3 ADCs per datasheet, 2 cited) | 2 x 12-bit, up to 16 channels |
| DAC | 2 x 12-bit | — |
| Timers | 4 x 16-bit GP, 1 x PWM, 2 x watchdog, SysTick | 10 timers (general-purpose + PWM) |
| DMA | 12-channel DMA controller | — |
| Communication | USART, UART, SPI, I2C, I2S, USB, CAN, Ethernet | — |
| Low-Power Modes | Sleep, Stop, Standby | Sleep, Stop, Standby |
| MSL-Level | [DATA_NEEDED: MSL level] | [DATA_NEEDED: MSL level] |
| RoHS-Status | Compliant (per distributor listing) | Compliant |
| Core Architecture | — | ARM Cortex-M3 32-bit RISC |
| Maximale Taktfrequenz | — | 72 MHz |
| Supply Voltage Range | — | 2.0 V to 3.6 V |
| Betriebstemperaturbereich | — | -40 C to +85 C |
| Ethernet MAC | — | 10/100 Mbps with dedicated DMA |
| USB Interface | — | USB 2.0 OTG full-speed (on-chip PHY) |
| CAN Controllers | — | 2 x CAN 2.0B |
| USART / UART | — | 5 USARTs |
| SPI | — | 3 SPIs |
| I2C | — | 2 I2Cs |
| Debug Interface | — | JTAG and SWD |