STM32F107RCT6 vs STM32F107VCT6 Comparaison
Comparaison détaillée côte à côte de STM32F107RCT6 par STMicroelectronics et STM32F107VCT6 par STMicroelectronics. Comparez les spécifications clés, les paramètres électriques, le conditionnement, le statut de cycle de vie, les prix et la disponibilité pour déterminer le meilleur composant pour vos exigences de conception.
STMicroelectronics
STM32F107RCT6 - 256KB Flash Ethernet ARM MCU | STMicroelectronics
STM32F107RCT6 ✓ ActifSTMicroelectronics
STM32F107VCT6 - 256KB Flash 72MHz Cortex-M3 MCU | STMicroelectronics
STM32F107VCT6 ✓ ActifComparaison des spécifications
| Paramètre | STM32F107RCT6 | STM32F107VCT6 |
|---|---|---|
| Marque | STMicroelectronics | STMicroelectronics |
| Catégorie | Microcontrollers | Microcontrollers |
| Statut du cycle de vie | Actif | Actif |
| Statut du stock | In Stock | In Stock |
| Prix unitaire (USD) | $5,55 | $6,95 |
| Core | ARM Cortex-M3 32-bit RISC | — |
| Maximum CPU Clock | 72 MHz | — |
| Performance | 1.25 DMIPS/MHz (Dhrystone 2.1) | — |
| Flash Memory | 256 KB (4 x 64 KB, read-while-write) | 256 KB (256K x 8) |
| SRAM | 64 KB | 64 KB |
| Supply Voltage (VDD) | 2.0 V to 3.6 V | — |
| Température de fonctionnement | -40 C to +85 C (grade 6) | — |
| Boîtier | LQFP-64, 10x10 mm, 0.5 mm pitch | 100-pin LQFP (14x14 mm) |
| Type de montage | Surface Mount | Surface Mount |
| Ethernet | 10/100 MAC MAC (IEEE 802.3), MII/RMII | — |
| USB | USB 2.0 OTG full-speed (host/device) | — |
| CAN | 2 x CAN 2.0B active | — |
| ADC | 2 x 12-bit, 1 us conversion (3 ADCs per datasheet, 2 cited) | 2 x 12-bit, up to 16 channels |
| DAC | 2 x 12-bit | — |
| Timers | 4 x 16-bit GP, 1 x PWM, 2 x watchdog, SysTick | 10 timers (general-purpose + PWM) |
| DMA | 12-channel DMA controller | — |
| Communication | USART, UART, SPI, I2C, I2S, USB, CAN, Ethernet | — |
| Low-Power Modes | Sleep, Stop, Standby | Sleep, Stop, Standby |
| Niveau MSL | [DATA_NEEDED: MSL level] | [DATA_NEEDED: MSL level] |
| Statut RoHS | Compliant (per distributor listing) | Compliant |
| Core Architecture | — | ARM Cortex-M3 32-bit RISC |
| Fréquence d'horloge maximale | — | 72 MHz |
| Supply Voltage Range | — | 2.0 V to 3.6 V |
| Plage de température de fonctionnement | — | -40 C to +85 C |
| Ethernet MAC | — | 10/100 Mbps with dedicated DMA |
| USB Interface | — | USB 2.0 OTG full-speed (on-chip PHY) |
| CAN Controllers | — | 2 x CAN 2.0B |
| USART / UART | — | 5 USARTs |
| SPI | — | 3 SPIs |
| I2C | — | 2 I2Cs |
| Debug Interface | — | JTAG and SWD |