STM32H750ZBT6 vs STM32F429VGT6 Vergleich

Detaillierter Direktvergleich von STM32H750ZBT6 von STMicroelectronics und STM32F429VGT6 von STMicroelectronics. Vergleichen Sie die wichtigsten Spezifikationen, elektrischen Parameter, Gehäuse, Lebenszyklusstatus, Preise und Verfügbarkeit, um das beste Bauteil für Ihre Designanforderungen zu ermitteln.

Spezifikationsvergleich

Parameter STM32H750ZBT6 STM32F429VGT6
Marke STMicroelectronics STMicroelectronics
Kategorie Microcontrollers Microcontrollers
Lebenszyklusstatus Aktiv Aktiv
Core Architecture ARM Cortex-M7 32-bit RISC —
Maximum CPU Clock 480 MHz —
Floating Point Unit Double-precision FPU + DSP —
Flash Memory 128 KB (128K x 8) 1 MB
SRAM 1 MB (256 KB DTCM + 864 KB system) 192 KB (including 4 KB backup SRAM)
Gehäuse 144-LQFP (20x20 mm) LQFP-100 (14 x 14 mm)
GPIO Count 114 —
Versorgungsspannung 1.62 V to 3.6 V —
Betriebstemperatur -40 °C to +85 °C -40 C to +85 C (grade 6)
ADC 3x 16-bit, up to 3.6 MSPS 3 x 12-bit, up to 2.4 MSPS
DAC 2x 12-bit 2 x 12-bit
Communication Interfaces USB OTG FS/HS, 4x USART/UART, 4x SPI, 4x I2C, 2x CAN, 2x SDMMC —
Crypto Acceleration AES-256, SHA-256, TRNG —
External Memory Bus 8/16-bit FMC for SRAM/PSRAM/NOR/NAND/SDRAM —
Montageart Surface Mount Surface Mount
MSL-Level 3 (168 hours) 3 (168 hours)
RoHS-Status Compliant Compliant
Core — ARM Cortex-M4 with FPU and DSP instructions
CPU Maximum Frequency — 180 MHz
DMIPS Performance — 225 DMIPS (1.25 DMIPS/MHz, Dhrystone 2.1)
Operating Voltage — 1.8 V to 3.6 V
ART Accelerator — Yes (0-wait-state Flash execution)
MPU — Yes (memory protection unit)
LCD-TFT Controller — Yes, up to XGA resolution
DMA2D (Chrom-ART) — Yes
USB OTG — HS + FS (with on-chip PHY)
Ethernet MAC — 10/100 with IEEE 1588v2
CAN Controllers — 2 x CAN 2.0B active
Timers — 17 (including 12 x 16-bit, 2 x 32-bit)
GPIOs — Up to 82 fast GPIOs
Crypto/Hash Accelerator — AES-128/192/256, SHA-1, MD5, 3DES
SDMMC — 1 x SDMMC host
Communication Peripherals — UART, SPI, I2C, SAI, SPDIF-Rx

Datenblätter & Ressourcen

Alle Produkte durchsuchen BOM erstellen Angebot anfordern