STM32H753IIT6 vs STM32F767IIT6 Vergleich
Detaillierter Direktvergleich von STM32H753IIT6 von STMicroelectronics und STM32F767IIT6 von STMicroelectronics. Vergleichen Sie die wichtigsten Spezifikationen, elektrischen Parameter, Gehäuse, Lebenszyklusstatus, Preise und Verfügbarkeit, um das beste Bauteil für Ihre Designanforderungen zu ermitteln.
STMicroelectronics
STM32H753IIT6 - Cortex-M7 MCU 480MHz 2MB Flash 176-LQFP | ST
STM32H753IIT6 ✓ AktivSTMicroelectronics
STM32F767IIT6 - 216MHz Cortex-M7 MCU 2MB Flash | STMicroelectronics
STM32F767IIT6 ✓ AktivSpezifikationsvergleich
| Parameter | STM32H753IIT6 | STM32F767IIT6 |
|---|---|---|
| Marke | STMicroelectronics | STMicroelectronics |
| Kategorie | Microcontrollers | Microcontrollers |
| Lebenszyklusstatus | Aktiv | Aktiv |
| Lagerstatus | In Stock | In Stock |
| Stückpreis (USD) | $9,45 | $11,95 |
| Core | ARM Cortex-M7 with DP-FPU and DSP | ARM Cortex-M7 32-bit RISC with FPU |
| Maximum CPU Frequency | 480 MHz | — |
| DMIPS | 1027 DMIPS | 462 DMIPS / 2.14 DMIPS/MHz (Dhrystone 2.1) |
| CoreMark Score | 2424 CoreMark | — |
| Program Memory (Flash) | 2 MB | — |
| SRAM | 1 MB (256 KB DTCM + 256 KB AXI SRAM + 64 KB ITCM + backup SRAM) | 512 KB |
| L1 Cache | 16 KB I-cache + 16 KB D-cache | 16 KB I-cache + 16 KB D-cache |
| Operating Voltage | 1.62 V to 3.6 V (3.3 V typical I/O) | — |
| Gehäuse | 176-pin LQFP (24x24 mm) | 176-pin LQFP (24x24 mm) |
| Montageart | Surface Mount | Surface Mount |
| Betriebstemperatur | -40 C to +85 C (industrial grade) | -40 C to +85 C |
| MSL-Level | 3 (168 hours) | 3 (168 hours) |
| RoHS-Status | Compliant | Compliant |
| ADC | 3 x 12-bit, 3.6 MSPS each | 3x 12-bit, up to 2.4 MSPS |
| DAC | 2 x 12-bit | 2x 12-bit |
| Communication Interfaces | USB OTG FS+HS, 2x CAN FD, 2x SDMMC, UART, SPI, I2C, ETH, FMC | — |
| Hardware Accelerators | JPEG codec, AES-256, SHA-256, TRNG, Chrom-ART (DMA2D) | — |
| Display Interface | TFT-LCD + MIPI-DSI | — |
| Camera Interface | DCMI 8- to 14-bit parallel | — |
| Maximale Taktfrequenz | — | 216 MHz |
| DSP Instructions | — | Yes (single-precision SIMD) |
| ART Accelerator | — | Yes (0-wait-state Flash execution) |
| Flash Memory | — | 2 MB |
| Supply Voltage (VDD) | — | 1.7 V to 3.6 V |
| USB | — | 2x USB OTG (FS + HS with on-chip PHY) |
| CAN | — | 2x CAN 2.0B |
| Ethernet | — | 10/100 MAC (MII/RMII) |
| SDMMC | — | 2x SDMMC |
| SPI / I2S | — | 6x SPI (2 with I2S) |
| I2C | — | 3x I2C |
| USART/UART | — | 4x USART + 2x UART |
| Timers | — | 12x 16-bit + 2x 32-bit |
| Crypto/Hash | — | AES-128/192/256, SHA-1/2, MD5, HMAC |
| Graphics | — | TFT LCD controller, JPEG codec, Chrom-ART DMA2D |