STM32H753IIT6 vs STM32F767IIT6 Comparaison
Comparaison détaillée côte à côte de STM32H753IIT6 par STMicroelectronics et STM32F767IIT6 par STMicroelectronics. Comparez les spécifications clés, les paramètres électriques, le conditionnement, le statut de cycle de vie, les prix et la disponibilité pour déterminer le meilleur composant pour vos exigences de conception.
STMicroelectronics
STM32H753IIT6 - Cortex-M7 MCU 480MHz 2MB Flash 176-LQFP | ST
STM32H753IIT6 ✓ ActifSTMicroelectronics
STM32F767IIT6 - 216MHz Cortex-M7 MCU 2MB Flash | STMicroelectronics
STM32F767IIT6 ✓ ActifComparaison des spécifications
| Paramètre | STM32H753IIT6 | STM32F767IIT6 |
|---|---|---|
| Marque | STMicroelectronics | STMicroelectronics |
| Catégorie | Microcontrollers | Microcontrollers |
| Statut du cycle de vie | Actif | Actif |
| Statut du stock | In Stock | In Stock |
| Prix unitaire (USD) | $9,45 | $11,95 |
| Core | ARM Cortex-M7 with DP-FPU and DSP | ARM Cortex-M7 32-bit RISC with FPU |
| Maximum CPU Frequency | 480 MHz | — |
| DMIPS | 1027 DMIPS | 462 DMIPS / 2.14 DMIPS/MHz (Dhrystone 2.1) |
| CoreMark Score | 2424 CoreMark | — |
| Program Memory (Flash) | 2 MB | — |
| SRAM | 1 MB (256 KB DTCM + 256 KB AXI SRAM + 64 KB ITCM + backup SRAM) | 512 KB |
| L1 Cache | 16 KB I-cache + 16 KB D-cache | 16 KB I-cache + 16 KB D-cache |
| Operating Voltage | 1.62 V to 3.6 V (3.3 V typical I/O) | — |
| Boîtier | 176-pin LQFP (24x24 mm) | 176-pin LQFP (24x24 mm) |
| Type de montage | Surface Mount | Surface Mount |
| Température de fonctionnement | -40 C to +85 C (industrial grade) | -40 C to +85 C |
| Niveau MSL | 3 (168 hours) | 3 (168 hours) |
| Statut RoHS | Compliant | Compliant |
| ADC | 3 x 12-bit, 3.6 MSPS each | 3x 12-bit, up to 2.4 MSPS |
| DAC | 2 x 12-bit | 2x 12-bit |
| Communication Interfaces | USB OTG FS+HS, 2x CAN FD, 2x SDMMC, UART, SPI, I2C, ETH, FMC | — |
| Hardware Accelerators | JPEG codec, AES-256, SHA-256, TRNG, Chrom-ART (DMA2D) | — |
| Display Interface | TFT-LCD + MIPI-DSI | — |
| Camera Interface | DCMI 8- to 14-bit parallel | — |
| Fréquence d'horloge maximale | — | 216 MHz |
| DSP Instructions | — | Yes (single-precision SIMD) |
| ART Accelerator | — | Yes (0-wait-state Flash execution) |
| Flash Memory | — | 2 MB |
| Supply Voltage (VDD) | — | 1.7 V to 3.6 V |
| USB | — | 2x USB OTG (FS + HS with on-chip PHY) |
| CAN | — | 2x CAN 2.0B |
| Ethernet | — | 10/100 MAC (MII/RMII) |
| SDMMC | — | 2x SDMMC |
| SPI / I2S | — | 6x SPI (2 with I2S) |
| I2C | — | 3x I2C |
| USART/UART | — | 4x USART + 2x UART |
| Timers | — | 12x 16-bit + 2x 32-bit |
| Crypto/Hash | — | AES-128/192/256, SHA-1/2, MD5, HMAC |
| Graphics | — | TFT LCD controller, JPEG codec, Chrom-ART DMA2D |