STM32L053R8T6 vs STM32L053R8T3 Vergleich

Detaillierter Direktvergleich von STM32L053R8T6 von STMicroelectronics und STM32L053R8T3 von STMicroelectronics. Vergleichen Sie die wichtigsten Spezifikationen, elektrischen Parameter, Gehäuse, Lebenszyklusstatus, Preise und Verfügbarkeit, um das beste Bauteil für Ihre Designanforderungen zu ermitteln.

STMicroelectronics
STM32L053R8T6 STM32L053R8T6 - 32MHz Ultra-Low-Power Cortex-M0+ MCU | ST

STM32L053R8T6 - 32MHz Ultra-Low-Power Cortex-M0+ MCU | ST

STM32L053R8T6 ✓ Aktiv
STMicroelectronics
STM32L053R8T3 STM32L053R8T3 - 32MHz Cortex-M0+ MCU | STMicroelectronics

STM32L053R8T3 - 32MHz Cortex-M0+ MCU | STMicroelectronics

STM32L053R8T3 ✓ Aktiv

Spezifikationsvergleich

Parameter STM32L053R8T6 STM32L053R8T3
Marke STMicroelectronics STMicroelectronics
Kategorie Microcontrollers Microcontrollers
Lebenszyklusstatus Aktiv Aktiv
Core Processor ARM Cortex-M0+ —
Core Architecture 32-bit —
Maximum CPU Frequency 32 MHz 32 MHz
Flash Memory Size 64 KB (64K x 8) —
SRAM Size 8 KB —
Supply Voltage Range 1.8 V to 3.6 V (BOR enabled; down to 1.65 V in power-down without BOR) —
Betriebstemperaturbereich -40 C to +125 C -40 °C to +125 °C
Gehäuse / Bauform 64-LQFP (10x10 mm) —
Anzahl der Pins 64 —
Montageart Surface Mount Surface mount
USB Controller USB 2.0 full-speed crystal-less device —
ADC 12-bit with hardware oversampling up to 16-bit resolution —
DAC 12-bit —
Comparators 2 ultra-low-power comparators —
LCD Driver Up to 8x28 segments —
Communication Interfaces I2C, SPI, USART —
Run Mode Current 84 uA/MHz (typical) —
Standby Current with RTC 0.29 uA (typical) —
Number of GPIOs [DATA_NEEDED: Number of GPIOs] —
RoHS Compliant —
Product Type — Ultra-low-power 32-bit microcontroller
Processor Core — ARM Cortex-M0+
Flash Memory — 64 KB
Flash Organization — 64K x 8 bits
SRAM — 8 KB
Operating Supply Voltage with BOR — 1.8 V to 3.6 V
Operating Supply Voltage without BOR — 1.65 V to 3.6 V
Power-Down Supply Voltage — Down to 1.65 V
USB Interface — USB 2.0 crystal-less
Architecture — 32-bit RISC
Gehäuse — 64-pin LQFP, 10 mm x 10 mm
Supply Configuration — 2.5 V / 3.3 V
Packaging Form — Tray
Power-Saving Modes — Comprehensive low-power mode set
Brown-Out Detector — Optional, depending on supply configuration
RoHS-Status — [DATA_NEEDED: RoHS status]
REACH Status — [DATA_NEEDED: REACH status]
AEC-Q100 Qualification — [DATA_NEEDED: AEC-Q100 qualification status]

Datenblätter & Ressourcen

Alle Produkte durchsuchen BOM erstellen Angebot anfordern