STM32L053R8T6 vs STM32L053R8T3 Comparaison

Comparaison détaillée côte à côte de STM32L053R8T6 par STMicroelectronics et STM32L053R8T3 par STMicroelectronics. Comparez les spécifications clés, les paramètres électriques, le conditionnement, le statut de cycle de vie, les prix et la disponibilité pour déterminer le meilleur composant pour vos exigences de conception.

STMicroelectronics
STM32L053R8T6 STM32L053R8T6 - 32MHz Ultra-Low-Power Cortex-M0+ MCU | ST

STM32L053R8T6 - 32MHz Ultra-Low-Power Cortex-M0+ MCU | ST

STM32L053R8T6 ✓ Actif
STMicroelectronics
STM32L053R8T3 STM32L053R8T3 - 32MHz Cortex-M0+ MCU | STMicroelectronics

STM32L053R8T3 - 32MHz Cortex-M0+ MCU | STMicroelectronics

STM32L053R8T3 ✓ Actif

Comparaison des spécifications

Paramètre STM32L053R8T6 STM32L053R8T3
Marque STMicroelectronics STMicroelectronics
Catégorie Microcontrollers Microcontrollers
Statut du cycle de vie Actif Actif
Core Processor ARM Cortex-M0+ —
Core Architecture 32-bit —
Maximum CPU Frequency 32 MHz 32 MHz
Flash Memory Size 64 KB (64K x 8) —
SRAM Size 8 KB —
Supply Voltage Range 1.8 V to 3.6 V (BOR enabled; down to 1.65 V in power-down without BOR) —
Plage de température de fonctionnement -40 C to +125 C -40 °C to +125 °C
Boîtier / Format 64-LQFP (10x10 mm) —
Nombre de broches 64 —
Type de montage Surface Mount Surface mount
USB Controller USB 2.0 full-speed crystal-less device —
ADC 12-bit with hardware oversampling up to 16-bit resolution —
DAC 12-bit —
Comparators 2 ultra-low-power comparators —
LCD Driver Up to 8x28 segments —
Communication Interfaces I2C, SPI, USART —
Run Mode Current 84 uA/MHz (typical) —
Standby Current with RTC 0.29 uA (typical) —
Number of GPIOs [DATA_NEEDED: Number of GPIOs] —
RoHS Compliant —
Product Type — Ultra-low-power 32-bit microcontroller
Processor Core — ARM Cortex-M0+
Flash Memory — 64 KB
Flash Organization — 64K x 8 bits
SRAM — 8 KB
Operating Supply Voltage with BOR — 1.8 V to 3.6 V
Operating Supply Voltage without BOR — 1.65 V to 3.6 V
Power-Down Supply Voltage — Down to 1.65 V
USB Interface — USB 2.0 crystal-less
Architecture — 32-bit RISC
Boîtier — 64-pin LQFP, 10 mm x 10 mm
Supply Configuration — 2.5 V / 3.3 V
Packaging Form — Tray
Power-Saving Modes — Comprehensive low-power mode set
Brown-Out Detector — Optional, depending on supply configuration
Statut RoHS — [DATA_NEEDED: RoHS status]
REACH Status — [DATA_NEEDED: REACH status]
AEC-Q100 Qualification — [DATA_NEEDED: AEC-Q100 qualification status]

Fiches techniques et ressources

Parcourir tous les produits Créer un BOM Demander un devis