STUSB4500QTR vs TUSB320HAIRWBR Vergleich
Detaillierter Direktvergleich von STUSB4500QTR von STMicroelectronics und TUSB320HAIRWBR von Texas Instruments. Vergleichen Sie die wichtigsten Spezifikationen, elektrischen Parameter, Gehäuse, Lebenszyklusstatus, Preise und Verfügbarkeit, um das beste Bauteil für Ihre Designanforderungen zu ermitteln.
STMicroelectronics
STUSB4500QTR - Standalone USB PD Sink Controller, 100W, 24-QFN | STMicroelectronics
STUSB4500QTR ✓ Aktiv
Spezifikationsvergleich
| Parameter | STUSB4500QTR | TUSB320HAIRWBR |
|---|---|---|
| Marke | STMicroelectronics | Texas Instruments |
| Kategorie | Interface ICs | USB Interface ICs |
| Lebenszyklusstatus | Aktiv | Aktiv |
| Lagerstatus | In Stock | In Stock |
| Stückpreis (USD) | $0,74 | $0,91 |
| Product Type | Standalone USB Type-C PD Sink Controller | — |
| USB Standard | USB Type-C R2.1, USB Power Delivery R3.0 | — |
| USB Speed | USB 1.2 / USB 2.0 (no USB 3.x data) | — |
| Maximum PD Power | 100 W (20 V / 5 A) | — |
| Supported PDO Voltages | 5 V / 9 V / 12 V / 15 V / 20 V | — |
| Role | Sink (UFP) only | — |
| Host Interface | I2C (Fast-mode 400 kHz) | — |
| CC Pin VBUS Short Protection | Up to 22 V on CC1, CC2, VCONN- | — |
| Integrated NVM | Yes (PDO profile configuration) | — |
| Dead Battery Support | Yes | — |
| Auto-Run Mode | Yes (MCU-less negotiation) | — |
| VCONN Source | No (sink only, no VCONN supply) | — |
| GPIO Pins | 2 (configurable) | — |
| Gehäuse | 24-QFN (4x4 mm) with exposed pad | X2QFN-12 (RWB), 1.6 mm x 1.6 mm |
| Betriebstemperaturbereich | -40 C to +105 C | -40 C to +85 C (Industrial) |
| Supply Voltage (VBUS to VCC internal LDO) | Up to 22 V tolerance | — |
| Montageart | Surface Mount | Surface Mount |
| MSL-Level | 3 (168 hours) | 1 (per TI packaging info) |
| RoHS-Status | Compliant | Compliant |
| USB-IF Certification | Yes (TID 1074413) | — |
| Funktion | — | USB Type-C Configuration Channel Logic and Port Control |
| USB Specification | — | USB Type-C 1.1 (backward compatible to 1.0) |
| Supply Voltage (VCC) | — | 3.3 V (typical); see datasheet for range |
| Supported Current Advertisement | — | Default USB / 1.5 A / 3 A |
| Port Roles Supported | — | DFP (Source), UFP (Sink), DRP (Dual Role) |
| Mode Configuration | — | Hardware (MODE pins); no firmware required |
| Enable Input (EN) | — | Active-high |
| CC Pin ESD Protection | — | HBM rated (per datasheet) |
| Lead-Free | — | Yes |
| Integrated CC Pull-Up Resistor | — | 5.1 kOhm (typ) per Type-C spec |
| Cable Orientation Detection | — | Yes (CC1/CC2) |