STUSB4500QTR vs TUSB320HAIRWBR Comparaison
Comparaison détaillée côte à côte de STUSB4500QTR par STMicroelectronics et TUSB320HAIRWBR par Texas Instruments. Comparez les spécifications clés, les paramètres électriques, le conditionnement, le statut de cycle de vie, les prix et la disponibilité pour déterminer le meilleur composant pour vos exigences de conception.
STMicroelectronics
STUSB4500QTR - Standalone USB PD Sink Controller, 100W, 24-QFN | STMicroelectronics
STUSB4500QTR ✓ Actif
Comparaison des spécifications
| Paramètre | STUSB4500QTR | TUSB320HAIRWBR |
|---|---|---|
| Marque | STMicroelectronics | Texas Instruments |
| Catégorie | Interface ICs | USB Interface ICs |
| Statut du cycle de vie | Actif | Actif |
| Statut du stock | In Stock | In Stock |
| Prix unitaire (USD) | $0,74 | $0,91 |
| Product Type | Standalone USB Type-C PD Sink Controller | — |
| USB Standard | USB Type-C R2.1, USB Power Delivery R3.0 | — |
| USB Speed | USB 1.2 / USB 2.0 (no USB 3.x data) | — |
| Maximum PD Power | 100 W (20 V / 5 A) | — |
| Supported PDO Voltages | 5 V / 9 V / 12 V / 15 V / 20 V | — |
| Role | Sink (UFP) only | — |
| Host Interface | I2C (Fast-mode 400 kHz) | — |
| CC Pin VBUS Short Protection | Up to 22 V on CC1, CC2, VCONN- | — |
| Integrated NVM | Yes (PDO profile configuration) | — |
| Dead Battery Support | Yes | — |
| Auto-Run Mode | Yes (MCU-less negotiation) | — |
| VCONN Source | No (sink only, no VCONN supply) | — |
| GPIO Pins | 2 (configurable) | — |
| Boîtier | 24-QFN (4x4 mm) with exposed pad | X2QFN-12 (RWB), 1.6 mm x 1.6 mm |
| Plage de température de fonctionnement | -40 C to +105 C | -40 C to +85 C (Industrial) |
| Supply Voltage (VBUS to VCC internal LDO) | Up to 22 V tolerance | — |
| Type de montage | Surface Mount | Surface Mount |
| Niveau MSL | 3 (168 hours) | 1 (per TI packaging info) |
| Statut RoHS | Compliant | Compliant |
| USB-IF Certification | Yes (TID 1074413) | — |
| Fonction | — | USB Type-C Configuration Channel Logic and Port Control |
| USB Specification | — | USB Type-C 1.1 (backward compatible to 1.0) |
| Supply Voltage (VCC) | — | 3.3 V (typical); see datasheet for range |
| Supported Current Advertisement | — | Default USB / 1.5 A / 3 A |
| Port Roles Supported | — | DFP (Source), UFP (Sink), DRP (Dual Role) |
| Mode Configuration | — | Hardware (MODE pins); no firmware required |
| Enable Input (EN) | — | Active-high |
| CC Pin ESD Protection | — | HBM rated (per datasheet) |
| Lead-Free | — | Yes |
| Integrated CC Pull-Up Resistor | — | 5.1 kOhm (typ) per Type-C spec |
| Cable Orientation Detection | — | Yes (CC1/CC2) |