THS4062IDGNR vs THS3061DGNR Vergleich
Detaillierter Direktvergleich von THS4062IDGNR von Texas Instruments und THS3061DGNR von Texas Instruments. Vergleichen Sie die wichtigsten Spezifikationen, elektrischen Parameter, Gehäuse, Lebenszyklusstatus, Preise und Verfügbarkeit, um das beste Bauteil für Ihre Designanforderungen zu ermitteln.
Texas Instruments
THS3061DGNR - 300MHz 7000V/us CFB Amplifier | Texas Instruments
THS3061DGNR ✓ AktivSpezifikationsvergleich
| Parameter | THS4062IDGNR | THS3061DGNR |
|---|---|---|
| Marke | Texas Instruments | Texas Instruments |
| Kategorie | Amplifier ICs | Amplifier ICs |
| Lebenszyklusstatus | Aktiv | Aktiv |
| Lagerstatus | In Stock | In Stock |
| Stückpreis (USD) | $1,45 | $2,70 |
| Amplifier Type | Voltage Feedback | Current Feedback (CFB) |
| Number of Channels | 2 (Dual) | 1 |
| Bandwidth (-3 dB) | 180 MHz | — |
| Slew Rate | 400 V/us | 7000 V/us |
| Settling Time (0.1%) | 40 ns | — |
| Output Drive Current | 115 mA (typ) | — |
| 0.1 dB Bandwidth Flatness | 75 MHz | — |
| Differential Gain Error | 0.02% | — |
| Differential Phase Error | 0.02 deg | — |
| Supply Voltage Range | 9 V to 33 V (single) / +/-4.5 V to +/-16.5 V (dual) | +/-15 V (30 V total) |
| Input Bias Current | 3 uA | — |
| Open-Loop Gain | 70 dB | — |
| Betriebstemperaturbereich | -40C to +85C | -40C to +85C |
| Gehäuse | 8-Pin HVSSOP (DGN) with Exposed Pad, 3.00 mm width | HVSSOP-8 (DGN) with PowerPAD, 8 pins |
| Montageart | Surface Mount | Surface Mount |
| Packaging | Tape & Reel (R suffix) | Tape & Reel (R suffix) |
| RoHS-Status | Compliant | [DATA_NEEDED: RoHS status] |
| Unity Gain Bandwidth | — | 300 MHz |
| 0.1 dB Bandwidth | — | 120 MHz (G = 2) |
| Output Current | — | +/-145 mA into 50 ohm |
| 2nd Harmonic Distortion | — | -81 dBc at 10 MHz |
| Process Technology | — | TI BICOM-1 |
| Kategorie | — | Linear - Amplifiers - Instrumentation, Op Amps, Buffer Amps |
| Input Voltage Noise | — | [DATA_NEEDED: input voltage noise] |
| Ruhestrom | — | [DATA_NEEDED: quiescent current] |
| Input Offset Voltage | — | [DATA_NEEDED: input offset voltage] |