THS4062IDGNR vs THS3061DGNR Comparación
Comparación detallada lado a lado de THS4062IDGNR por Texas Instruments y THS3061DGNR por Texas Instruments. Compare las especificaciones clave, los parámetros eléctricos, el encapsulado, el estado del ciclo de vida, los precios y la disponibilidad para determinar el mejor componente para los requisitos de su diseño.
Texas Instruments
THS3061DGNR - 300MHz 7000V/us CFB Amplifier | Texas Instruments
THS3061DGNR ✓ ActivoComparación de especificaciones
| Parámetro | THS4062IDGNR | THS3061DGNR |
|---|---|---|
| Marca | Texas Instruments | Texas Instruments |
| Categoría | Amplifier ICs | Amplifier ICs |
| Estado del ciclo de vida | Activo | Activo |
| Estado del stock | In Stock | In Stock |
| Precio unitario (USD) | $1,45 | $2,70 |
| Amplifier Type | Voltage Feedback | Current Feedback (CFB) |
| Number of Channels | 2 (Dual) | 1 |
| Bandwidth (-3 dB) | 180 MHz | — |
| Slew Rate | 400 V/us | 7000 V/us |
| Settling Time (0.1%) | 40 ns | — |
| Output Drive Current | 115 mA (typ) | — |
| 0.1 dB Bandwidth Flatness | 75 MHz | — |
| Differential Gain Error | 0.02% | — |
| Differential Phase Error | 0.02 deg | — |
| Supply Voltage Range | 9 V to 33 V (single) / +/-4.5 V to +/-16.5 V (dual) | +/-15 V (30 V total) |
| Input Bias Current | 3 uA | — |
| Open-Loop Gain | 70 dB | — |
| Rango de temperatura de funcionamiento | -40C to +85C | -40C to +85C |
| Encapsulado | 8-Pin HVSSOP (DGN) with Exposed Pad, 3.00 mm width | HVSSOP-8 (DGN) with PowerPAD, 8 pins |
| Tipo de montaje | Surface Mount | Surface Mount |
| Packaging | Tape & Reel (R suffix) | Tape & Reel (R suffix) |
| Estado RoHS | Compliant | [DATA_NEEDED: RoHS status] |
| Unity Gain Bandwidth | — | 300 MHz |
| 0.1 dB Bandwidth | — | 120 MHz (G = 2) |
| Output Current | — | +/-145 mA into 50 ohm |
| 2nd Harmonic Distortion | — | -81 dBc at 10 MHz |
| Process Technology | — | TI BICOM-1 |
| Categoría | — | Linear - Amplifiers - Instrumentation, Op Amps, Buffer Amps |
| Input Voltage Noise | — | [DATA_NEEDED: input voltage noise] |
| Corriente en reposo | — | [DATA_NEEDED: quiescent current] |
| Input Offset Voltage | — | [DATA_NEEDED: input offset voltage] |