THVD1450DRBR vs ISO1450BDWR Vergleich
Detaillierter Direktvergleich von THVD1450DRBR von Texas Instruments und ISO1450BDWR von Texas Instruments. Vergleichen Sie die wichtigsten Spezifikationen, elektrischen Parameter, Gehäuse, Lebenszyklusstatus, Preise und Verfügbarkeit, um das beste Bauteil für Ihre Designanforderungen zu ermitteln.
Texas Instruments
THVD1450DRBR - 3.3-5V RS-485 Transceiver, ±18kV ESD, 50Mbps | TI
THVD1450DRBR ✓ AktivTexas Instruments
ISO1450BDWR - 50Mbps 5kVrms Isolated RS-485/RS-422 Transceiver | Texas Instruments
ISO1450BDWR ✓ AktivSpezifikationsvergleich
| Parameter | THVD1450DRBR | ISO1450BDWR |
|---|---|---|
| Marke | Texas Instruments | Texas Instruments |
| Kategorie | Interface ICs | Interface ICs |
| Lebenszyklusstatus | Aktiv | Aktiv |
| Lagerstatus | In Stock | In Stock |
| Stückpreis (USD) | $1,25 | $2,95 |
| Product Type | RS-485/RS-422 Transceiver (half-duplex) | — |
| Number of Drivers/Receivers | 1/1 | — |
| Supply Voltage (VCC) | 3 V to 5.5 V | — |
| Maximum Data Rate | 50 Mbps | — |
| ESD Protection (Bus Pins) | ±18 kV IEC 61000-4-2 contact/air | — |
| EFT Immunity | ±4 kV IEC 61000-4-4 | — |
| Common-Mode Range | -7 V to +12 V | Wide common-mode bus voltage range (per datasheet) |
| Receiver Hysteresis | 30 mV | [DATA_NEEDED: receiver hysteresis voltage] |
| Receiver Fail-Safe | Internal biasing (idle/short/open = logic high) | — |
| Unit Load | 1 UL (32 nodes on bus) | 1/8 (up to 256 nodes on bus) |
| Betriebstemperatur | -40°C to +125°C | -40C to +125C |
| Gehäuse | 8-VSON EP (DRB) 3x3 mm | SOIC-16 wide-body (DW), 16 pins |
| Montageart | Surface Mount, wettable flank | Surface Mount |
| Moisture Sensitivity Level | MSL 1 | — |
| RoHS-Status | Compliant | Compliant |
| Duplex Mode | Half | — |
| Funktion | — | Isolated half-duplex RS-485 / RS-422 transceiver |
| Data Rate (max) | — | 50 Mbps |
| Isolation Voltage (rms) | — | 5 kVrms (reinforced) |
| Number of Drivers / Receivers | — | 1/1 |
| Duplex | — | Half |
| Supply Voltage VCC1 (logic side) | — | 3 V to 5.5 V |
| Supply Voltage VCC2 (bus side) | — | Internally generated by isolated DC-DC |
| Bus Pin ESD (IEC 61000-4-2) | — | ±16 kV (air / contact, per datasheet) |
| Bus Pin ESD (HBM) | — | ±4 kV |
| IEC 61000-4-4 EFT Immunity | — | ±4 kV |
| Surge Immunity | — | [DATA_NEEDED: IEC 61000-4-5 surge rating] |
| Thermisches Abschalten | — | Yes |
| Current Limiting | — | Yes |
| Low-Power Standby | — | Yes |
| MSL-Level | — | 3 (per JEDEC J-STD-020) |
| Compliance Standards | — | TIA/EIA-485-A, TIA/EIA-422, IEC 61000-4-2, IEC 61000-4-4 |