THVD1452DR vs THVD1450DRBR Vergleich
Detaillierter Direktvergleich von THVD1452DR von Texas Instruments und THVD1450DRBR von Texas Instruments. Vergleichen Sie die wichtigsten Spezifikationen, elektrischen Parameter, Gehäuse, Lebenszyklusstatus, Preise und Verfügbarkeit, um das beste Bauteil für Ihre Designanforderungen zu ermitteln.
Texas Instruments
THVD1452DR - 3.3-5V RS-485 Transceiver, ±18kV ESD, SOIC-14 | TI
THVD1452DR ✓ AktivTexas Instruments
THVD1450DRBR - 3.3-5V RS-485 Transceiver, ±18kV ESD, 50Mbps | TI
THVD1450DRBR ✓ AktivSpezifikationsvergleich
| Parameter | THVD1452DR | THVD1450DRBR |
|---|---|---|
| Marke | Texas Instruments | Texas Instruments |
| Kategorie | Interface ICs | Interface ICs |
| Lebenszyklusstatus | Aktiv | Aktiv |
| Lagerstatus | In Stock | In Stock |
| Stückpreis (USD) | $0,54 | $1,25 |
| Protocol | RS-422 / RS-485 | — |
| Funktion | 1/1 Transceiver, full-duplex | — |
| Number of Drivers/Receivers | 1/1 | 1/1 |
| Supply Voltage (VCC) | 3.0 V to 5.5 V | 3 V to 5.5 V |
| Maximum Data Rate | 50 Mbps | 50 Mbps |
| IEC ESD Protection (Bus Pins) | ±18 kV air-gap (IEC 61000-4-2); ±8 kV contact | — |
| HBM ESD Protection | ±16 kV (all pins, HBM) | — |
| Common-Mode Voltage Range | -7 V to +12 V | — |
| Bus Unit Load | 1/8 UL (up to 256 nodes) | — |
| Receiver Fail-safe | True fail-safe (idle/short/open = logic high) | — |
| Quiescent Current (no load) | [DATA_NEEDED: Iq value] | — |
| Betriebstemperatur | -40°C to +125°C | -40°C to +125°C |
| Gehäuse | SOIC-14 (D) | 8-VSON EP (DRB) 3x3 mm |
| Montageart | Surface Mount | Surface Mount, wettable flank |
| MSL-Level | 1 (per TI product page) | — |
| RoHS-Status | Compliant | Compliant |
| Lead-free / Halogen-free | Yes / Yes | — |
| AEC-Q100 Automotive | Not applicable (no -Q1 suffix) | — |
| Product Type | — | RS-485/RS-422 Transceiver (half-duplex) |
| ESD Protection (Bus Pins) | — | ±18 kV IEC 61000-4-2 contact/air |
| EFT Immunity | — | ±4 kV IEC 61000-4-4 |
| Common-Mode Range | — | -7 V to +12 V |
| Receiver Hysteresis | — | 30 mV |
| Receiver Fail-Safe | — | Internal biasing (idle/short/open = logic high) |
| Unit Load | — | 1 UL (32 nodes on bus) |
| Moisture Sensitivity Level | — | MSL 1 |
| Duplex Mode | — | Half |