THVD1452DR vs THVD1450DRBR Comparaison
Comparaison détaillée côte à côte de THVD1452DR par Texas Instruments et THVD1450DRBR par Texas Instruments. Comparez les spécifications clés, les paramètres électriques, le conditionnement, le statut de cycle de vie, les prix et la disponibilité pour déterminer le meilleur composant pour vos exigences de conception.
Texas Instruments
THVD1452DR - 3.3-5V RS-485 Transceiver, ±18kV ESD, SOIC-14 | TI
THVD1452DR ✓ ActifTexas Instruments
THVD1450DRBR - 3.3-5V RS-485 Transceiver, ±18kV ESD, 50Mbps | TI
THVD1450DRBR ✓ ActifComparaison des spécifications
| Paramètre | THVD1452DR | THVD1450DRBR |
|---|---|---|
| Marque | Texas Instruments | Texas Instruments |
| Catégorie | Interface ICs | Interface ICs |
| Statut du cycle de vie | Actif | Actif |
| Statut du stock | In Stock | In Stock |
| Prix unitaire (USD) | $0,54 | $1,25 |
| Protocol | RS-422 / RS-485 | — |
| Fonction | 1/1 Transceiver, full-duplex | — |
| Number of Drivers/Receivers | 1/1 | 1/1 |
| Supply Voltage (VCC) | 3.0 V to 5.5 V | 3 V to 5.5 V |
| Maximum Data Rate | 50 Mbps | 50 Mbps |
| IEC ESD Protection (Bus Pins) | ±18 kV air-gap (IEC 61000-4-2); ±8 kV contact | — |
| HBM ESD Protection | ±16 kV (all pins, HBM) | — |
| Common-Mode Voltage Range | -7 V to +12 V | — |
| Bus Unit Load | 1/8 UL (up to 256 nodes) | — |
| Receiver Fail-safe | True fail-safe (idle/short/open = logic high) | — |
| Quiescent Current (no load) | [DATA_NEEDED: Iq value] | — |
| Température de fonctionnement | -40°C to +125°C | -40°C to +125°C |
| Boîtier | SOIC-14 (D) | 8-VSON EP (DRB) 3x3 mm |
| Type de montage | Surface Mount | Surface Mount, wettable flank |
| Niveau MSL | 1 (per TI product page) | — |
| Statut RoHS | Compliant | Compliant |
| Lead-free / Halogen-free | Yes / Yes | — |
| AEC-Q100 Automotive | Not applicable (no -Q1 suffix) | — |
| Product Type | — | RS-485/RS-422 Transceiver (half-duplex) |
| ESD Protection (Bus Pins) | — | ±18 kV IEC 61000-4-2 contact/air |
| EFT Immunity | — | ±4 kV IEC 61000-4-4 |
| Common-Mode Range | — | -7 V to +12 V |
| Receiver Hysteresis | — | 30 mV |
| Receiver Fail-Safe | — | Internal biasing (idle/short/open = logic high) |
| Unit Load | — | 1 UL (32 nodes on bus) |
| Moisture Sensitivity Level | — | MSL 1 |
| Duplex Mode | — | Half |