TJA1043TK vs TJA1043TKY Vergleich

Detaillierter Direktvergleich von TJA1043TK von NXP Semiconductors und TJA1043TKY von NXP Semiconductors. Vergleichen Sie die wichtigsten Spezifikationen, elektrischen Parameter, Gehäuse, Lebenszyklusstatus, Preise und Verfügbarkeit, um das beste Bauteil für Ihre Designanforderungen zu ermitteln.

NXP Semiconductors
TJA1043TK TJA1043TK - High-Speed CAN Transceiver, HVSON-14 | NXP

TJA1043TK - High-Speed CAN Transceiver, HVSON-14 | NXP

TJA1043TK ✓ Aktiv
NXP Semiconductors
TJA1043TKY TJA1043TKY - 5 Mbps CAN Transceiver | NXP | Automotive

TJA1043TKY - 5 Mbps CAN Transceiver | NXP | Automotive

TJA1043TKY ✓ Aktiv

Spezifikationsvergleich

Parameter TJA1043TK TJA1043TKY
Marke NXP Semiconductors NXP Semiconductors
Kategorie Interface ICs Interface ICs
Lebenszyklusstatus Aktiv Aktiv
Product Type High-speed CAN transceiver with standby and sleep mode 1/1 half CANbus transceiver
Protocol ISO 11898-2 / ISO 11898-5 CAN —
Number of Drivers/Receivers 1/1 —
Data Rate (max) 1 Mbit/s —
Supply Voltage VCC 4.75 V to 5.25 V —
Supply Voltage VIO (logic-side I/O) 2.8 V to 5.25 V —
Battery Supply VBAT 4.5 V to 40 V (load-dump tolerant) —
Bus Pin Voltage Range (CANH/CANL) -27 V to +40 V —
Standby/Sleep Quiescent Current [DATA_NEEDED: typical quiescent current in standby/sleep] —
ESD Protection (CANH/CANL) [DATA_NEEDED: IEC 61000-4-2 contact/air discharge level] —
Betriebstemperatur -40 C to +125 C —
Gehäuse 14-HVSON (3.0 mm x 4.5 mm) 14-HVSON, 3 x 4.5 mm
Montageart Surface Mount Surface mount
Power Modes Normal, Standby, Sleep, Go-To-Sleep, Power-On —
Wake-up Sources Local (via WK pin) and remote (CAN bus) with WUP source recognition —
RoHS-Status Compliant —
MSL-Level [DATA_NEEDED: MSL moisture sensitivity level] —
CAN Data Rate — 5 Mbps
Versorgungsspannung — 5 V
Operating Modes — Normal, sleep, and standby
Automotive Qualification — AEC-Q100
Bus Interface — Two-wire differential CAN bus
Controller Interface — CAN protocol controller
Transmit Capability — Differential CANH/CANL output
Receive Capability — Differential receive from CANH/CANL
Pin-Anzahl — 14 pins
Transceiver Count — 1 transceiver
Product Category — High-speed CAN transceiver
Target Market — Automotive
Manufacturer — NXP Semiconductors
RoHS Compliance — [DATA_NEEDED: RoHS compliance]
REACH Compliance — [DATA_NEEDED: REACH compliance]
Lead-Free Status — [DATA_NEEDED: lead-free status]
Betriebstemperaturbereich — [DATA_NEEDED: operating temperature range]

Datenblätter & Ressourcen

Alle Produkte durchsuchen BOM erstellen Angebot anfordern