TJA1043TK vs TJA1043TKY Comparaison

Comparaison détaillée côte à côte de TJA1043TK par NXP Semiconductors et TJA1043TKY par NXP Semiconductors. Comparez les spécifications clés, les paramètres électriques, le conditionnement, le statut de cycle de vie, les prix et la disponibilité pour déterminer le meilleur composant pour vos exigences de conception.

NXP Semiconductors
TJA1043TK TJA1043TK - High-Speed CAN Transceiver, HVSON-14 | NXP

TJA1043TK - High-Speed CAN Transceiver, HVSON-14 | NXP

TJA1043TK ✓ Actif
NXP Semiconductors
TJA1043TKY TJA1043TKY - 5 Mbps CAN Transceiver | NXP | Automotive

TJA1043TKY - 5 Mbps CAN Transceiver | NXP | Automotive

TJA1043TKY ✓ Actif

Comparaison des spécifications

Paramètre TJA1043TK TJA1043TKY
Marque NXP Semiconductors NXP Semiconductors
Catégorie Interface ICs Interface ICs
Statut du cycle de vie Actif Actif
Product Type High-speed CAN transceiver with standby and sleep mode 1/1 half CANbus transceiver
Protocol ISO 11898-2 / ISO 11898-5 CAN —
Number of Drivers/Receivers 1/1 —
Data Rate (max) 1 Mbit/s —
Supply Voltage VCC 4.75 V to 5.25 V —
Supply Voltage VIO (logic-side I/O) 2.8 V to 5.25 V —
Battery Supply VBAT 4.5 V to 40 V (load-dump tolerant) —
Bus Pin Voltage Range (CANH/CANL) -27 V to +40 V —
Standby/Sleep Quiescent Current [DATA_NEEDED: typical quiescent current in standby/sleep] —
ESD Protection (CANH/CANL) [DATA_NEEDED: IEC 61000-4-2 contact/air discharge level] —
Température de fonctionnement -40 C to +125 C —
Boîtier 14-HVSON (3.0 mm x 4.5 mm) 14-HVSON, 3 x 4.5 mm
Type de montage Surface Mount Surface mount
Power Modes Normal, Standby, Sleep, Go-To-Sleep, Power-On —
Wake-up Sources Local (via WK pin) and remote (CAN bus) with WUP source recognition —
Statut RoHS Compliant —
Niveau MSL [DATA_NEEDED: MSL moisture sensitivity level] —
CAN Data Rate — 5 Mbps
Tension d'alimentation — 5 V
Operating Modes — Normal, sleep, and standby
Automotive Qualification — AEC-Q100
Bus Interface — Two-wire differential CAN bus
Controller Interface — CAN protocol controller
Transmit Capability — Differential CANH/CANL output
Receive Capability — Differential receive from CANH/CANL
Nombre de broches — 14 pins
Transceiver Count — 1 transceiver
Product Category — High-speed CAN transceiver
Target Market — Automotive
Manufacturer — NXP Semiconductors
RoHS Compliance — [DATA_NEEDED: RoHS compliance]
REACH Compliance — [DATA_NEEDED: REACH compliance]
Lead-Free Status — [DATA_NEEDED: lead-free status]
Plage de température de fonctionnement — [DATA_NEEDED: operating temperature range]

Fiches techniques et ressources

Parcourir tous les produits Créer un BOM Demander un devis