TL072CDR vs TL072CP Vergleich
Detaillierter Direktvergleich von TL072CDR von Texas Instruments und TL072CP von Texas Instruments. Vergleichen Sie die wichtigsten Spezifikationen, elektrischen Parameter, Gehäuse, Lebenszyklusstatus, Preise und Verfügbarkeit, um das beste Bauteil für Ihre Designanforderungen zu ermitteln.
Texas Instruments
TL072CP - Dual JFET-Input Low-Noise Op Amp, 8-PDIP | Texas Instruments
TL072CP ✓ AktivSpezifikationsvergleich
| Parameter | TL072CDR | TL072CP |
|---|---|---|
| Marke | Texas Instruments | Texas Instruments |
| Kategorie | Amplifier ICs | Amplifier ICs |
| Lebenszyklusstatus | Aktiv | Aktiv |
| Lagerstatus | In Stock | In Stock |
| Stückpreis (USD) | $0,09 | $0,31 |
| Amplifier Type | Dual operational amplifier | JFET-Input Operational Amplifier |
| Input Stage | JFET-input | — |
| Number of Amplifiers | 2 | — |
| Gain-Bandwidth Product | 3 MHz | — |
| Slew Rate | 13 V/µs | 13 V/µs (typical) |
| Listed Supply Voltage Range | 7 V to 36 V | — |
| Gehäuse | 8-pin SOIC | — |
| Frequency Compensation | Internal | — |
| Output Short-Circuit Protection | Yes | Yes |
| Input Impedance | High; exact value not supplied in verified data | — |
| Input Bias Current | Low; exact value not supplied in verified data | 30 pA (typical) |
| Low Total Harmonic Distortion | Yes; exact value not supplied in verified data | — |
| Ausgangsrauschen | [DATA_NEEDED: output noise] | — |
| Input Offset Voltage | [DATA_NEEDED: input offset voltage] | 3 mV (typical, C grade) |
| Common-Mode Rejection | [DATA_NEEDED: common-mode rejection] | — |
| Versorgungsstrom | [DATA_NEEDED: supply current] | — |
| Betriebstemperaturbereich | [DATA_NEEDED: operating temperature range] | 0°C to +70°C (C grade) |
| Montageart | Surface mount | Through Hole |
| Manufacturer | — | Texas Instruments |
| Part Status | — | Active |
| Number of Circuits | — | 2 (Dual) |
| Gain Bandwidth Product | — | 3 MHz (typical) |
| Input Noise Voltage Density | — | 18 nV/√Hz (typical at 1 kHz) |
| Total Harmonic Distortion | — | 0.003% (typical) |
| Supply Voltage Range (Dual) | — | ±3.5 V to ±18 V |
| Supply Voltage Range (Single) | — | 7 V to 36 V |
| Gehäuse / Bauform | — | 8-PDIP (Plastic DIP, through-hole) |
| Pin-Anzahl | — | 8 |
| Internal Frequency Compensation | — | Yes |
| Latch-up Free Operation | — | Yes |
| RoHS-Status | — | Compliant |