TL072CDR vs TL072CP Comparaison
Comparaison détaillée côte à côte de TL072CDR par Texas Instruments et TL072CP par Texas Instruments. Comparez les spécifications clés, les paramètres électriques, le conditionnement, le statut de cycle de vie, les prix et la disponibilité pour déterminer le meilleur composant pour vos exigences de conception.
Texas Instruments
TL072CP - Dual JFET-Input Low-Noise Op Amp, 8-PDIP | Texas Instruments
TL072CP ✓ ActifComparaison des spécifications
| Paramètre | TL072CDR | TL072CP |
|---|---|---|
| Marque | Texas Instruments | Texas Instruments |
| Catégorie | Amplifier ICs | Amplifier ICs |
| Statut du cycle de vie | Actif | Actif |
| Statut du stock | In Stock | In Stock |
| Prix unitaire (USD) | $0,09 | $0,31 |
| Amplifier Type | Dual operational amplifier | JFET-Input Operational Amplifier |
| Input Stage | JFET-input | — |
| Number of Amplifiers | 2 | — |
| Gain-Bandwidth Product | 3 MHz | — |
| Slew Rate | 13 V/µs | 13 V/µs (typical) |
| Listed Supply Voltage Range | 7 V to 36 V | — |
| Boîtier | 8-pin SOIC | — |
| Frequency Compensation | Internal | — |
| Output Short-Circuit Protection | Yes | Yes |
| Input Impedance | High; exact value not supplied in verified data | — |
| Input Bias Current | Low; exact value not supplied in verified data | 30 pA (typical) |
| Low Total Harmonic Distortion | Yes; exact value not supplied in verified data | — |
| Bruit de sortie | [DATA_NEEDED: output noise] | — |
| Input Offset Voltage | [DATA_NEEDED: input offset voltage] | 3 mV (typical, C grade) |
| Common-Mode Rejection | [DATA_NEEDED: common-mode rejection] | — |
| Courant d'alimentation | [DATA_NEEDED: supply current] | — |
| Plage de température de fonctionnement | [DATA_NEEDED: operating temperature range] | 0°C to +70°C (C grade) |
| Type de montage | Surface mount | Through Hole |
| Manufacturer | — | Texas Instruments |
| Part Status | — | Active |
| Number of Circuits | — | 2 (Dual) |
| Gain Bandwidth Product | — | 3 MHz (typical) |
| Input Noise Voltage Density | — | 18 nV/√Hz (typical at 1 kHz) |
| Total Harmonic Distortion | — | 0.003% (typical) |
| Supply Voltage Range (Dual) | — | ±3.5 V to ±18 V |
| Supply Voltage Range (Single) | — | 7 V to 36 V |
| Boîtier / Format | — | 8-PDIP (Plastic DIP, through-hole) |
| Nombre de broches | — | 8 |
| Internal Frequency Compensation | — | Yes |
| Latch-up Free Operation | — | Yes |
| Statut RoHS | — | Compliant |