TLE9104SHXUMA1 vs BTS462TATMA1 Vergleich
Detaillierter Direktvergleich von TLE9104SHXUMA1 von Infineon und BTS462TATMA1 von Infineon. Vergleichen Sie die wichtigsten Spezifikationen, elektrischen Parameter, Gehäuse, Lebenszyklusstatus, Preise und Verfügbarkeit, um das beste Bauteil für Ihre Designanforderungen zu ermitteln.
Spezifikationsvergleich
| Parameter | TLE9104SHXUMA1 | BTS462TATMA1 |
|---|---|---|
| Marke | Infineon | Infineon |
| Kategorie | Power MOSFET Drivers | Power MOSFET Drivers |
| Lebenszyklusstatus | Aktiv | Aktiv |
| Lagerstatus | In Stock | In Stock |
| Stückpreis (USD) | $3,72 | $1,38 |
| Product Type | Multi-Channel Low-Side Power Switch | Smart High-Side Power Switch |
| Number of Channels | 4 | 1 |
| Load Current per Channel | 3 A (continuous) | — |
| Topologie | 1:1 N-Channel Low-Side Switch | — |
| Supply Voltage Range (VDD) | 4.5 V to 28 V | — |
| Logic Reference (VIO) | 3.3 V / 5 V compatible | — |
| Communication Interface | 16-bit SPI | — |
| R_DS(on) per Channel | [DATA_NEEDED: typical R_DS(on) in mohm] | — |
| Betriebstemperatur | -40 °C to +150 °C (junction) | -40 C to +150 C (junction) |
| Gehäuse | PG-DSO-20-88 (20-pin BFSOP with exposed pad) | PG-TO252-5 (DPAK-5) |
| Montageart | Surface Mount | Surface Mount |
| Protection Features | Over-current, Over-temperature, Over-load, short-to-ground, open-load detection | — |
| Diagnostic Output | SPI status registers (per-channel fault flags) | — |
| Automotive Qualification | AEC-Q100 qualified (automotive grade) | — |
| MSL-Level | MSL3 (per JEDEC J-STD-020) | [DATA_NEEDED: MSL rating] |
| RoHS / Lead-Free | RoHS compliant, lead-free | — |
| Reset Pin (RESN) | Active-low with configurable reset duration | — |
| Manufacturer | — | Infineon Technologies |
| Ausgangskonfiguration | — | High-Side |
| Output Current (Continuous) | — | 3.5 A |
| On-State Resistance (RDS(on)) | — | [DATA_NEEDED: typical RDS(on) in mOhm] |
| Supply Voltage Range (Vbb) | — | 5 V to 34 V |
| Load Dump Protection | — | Yes |
| Overvoltage Protection | — | Yes |
| Overload / Current Limit | — | Yes |
| Short-Circuit Protection | — | Yes |
| Thermisches Abschalten | — | Yes (with auto-restart) |
| Undervoltage Shutdown | — | Yes |
| Fast Demagnetization | — | Yes (for inductive loads) |
| Diagnostic Output (STATUS pin) | — | Yes |
| RoHS-Status | — | Compliant |