TLE9104SHXUMA1 vs BTS462TATMA1 Comparaison
Comparaison détaillée côte à côte de TLE9104SHXUMA1 par Infineon et BTS462TATMA1 par Infineon. Comparez les spécifications clés, les paramètres électriques, le conditionnement, le statut de cycle de vie, les prix et la disponibilité pour déterminer le meilleur composant pour vos exigences de conception.
Comparaison des spécifications
| Paramètre | TLE9104SHXUMA1 | BTS462TATMA1 |
|---|---|---|
| Marque | Infineon | Infineon |
| Catégorie | Power MOSFET Drivers | Power MOSFET Drivers |
| Statut du cycle de vie | Actif | Actif |
| Statut du stock | In Stock | In Stock |
| Prix unitaire (USD) | $3,72 | $1,38 |
| Product Type | Multi-Channel Low-Side Power Switch | Smart High-Side Power Switch |
| Number of Channels | 4 | 1 |
| Load Current per Channel | 3 A (continuous) | — |
| Topologie | 1:1 N-Channel Low-Side Switch | — |
| Supply Voltage Range (VDD) | 4.5 V to 28 V | — |
| Logic Reference (VIO) | 3.3 V / 5 V compatible | — |
| Communication Interface | 16-bit SPI | — |
| R_DS(on) per Channel | [DATA_NEEDED: typical R_DS(on) in mohm] | — |
| Température de fonctionnement | -40 °C to +150 °C (junction) | -40 C to +150 C (junction) |
| Boîtier | PG-DSO-20-88 (20-pin BFSOP with exposed pad) | PG-TO252-5 (DPAK-5) |
| Type de montage | Surface Mount | Surface Mount |
| Protection Features | Over-current, Over-temperature, Over-load, short-to-ground, open-load detection | — |
| Diagnostic Output | SPI status registers (per-channel fault flags) | — |
| Automotive Qualification | AEC-Q100 qualified (automotive grade) | — |
| Niveau MSL | MSL3 (per JEDEC J-STD-020) | [DATA_NEEDED: MSL rating] |
| RoHS / Lead-Free | RoHS compliant, lead-free | — |
| Reset Pin (RESN) | Active-low with configurable reset duration | — |
| Manufacturer | — | Infineon Technologies |
| Configuration de sortie | — | High-Side |
| Output Current (Continuous) | — | 3.5 A |
| On-State Resistance (RDS(on)) | — | [DATA_NEEDED: typical RDS(on) in mOhm] |
| Supply Voltage Range (Vbb) | — | 5 V to 34 V |
| Load Dump Protection | — | Yes |
| Overvoltage Protection | — | Yes |
| Overload / Current Limit | — | Yes |
| Short-Circuit Protection | — | Yes |
| Arrêt thermique | — | Yes (with auto-restart) |
| Undervoltage Shutdown | — | Yes |
| Fast Demagnetization | — | Yes (for inductive loads) |
| Diagnostic Output (STATUS pin) | — | Yes |
| Statut RoHS | — | Compliant |