TLE94003EPXUMA1 vs TLE75004EPDXUMA1 Vergleich
Detaillierter Direktvergleich von TLE94003EPXUMA1 von Infineon und TLE75004EPDXUMA1 von Infineon. Vergleichen Sie die wichtigsten Spezifikationen, elektrischen Parameter, Gehäuse, Lebenszyklusstatus, Preise und Verfügbarkeit, um das beste Bauteil für Ihre Designanforderungen zu ermitteln.
Infineon
TLE94003EPXUMA1 - Triple Half-Bridge 5.5-20V DC Motor Driver | Infineon
TLE94003EPXUMA1 ✓ AktivSpezifikationsvergleich
| Parameter | TLE94003EPXUMA1 | TLE75004EPDXUMA1 |
|---|---|---|
| Marke | Infineon | Infineon |
| Kategorie | Motor Drivers | Power MOSFET Drivers |
| Lebenszyklusstatus | Aktiv | Aktiv |
| Lagerstatus | In Stock | In Stock |
| Stückpreis (USD) | $1,71 | $0,93 |
| Topologie | Triple Half-Bridge (3 independent half-bridges) | — |
| Ausgangstyp | DMOS power stage | — |
| Supply Voltage Range | 5.5 V to 20 V | — |
| Maximum Output Current (per channel) | [DATA_NEEDED: per-channel peak current] | — |
| On-Resistance (typ, per HS+LS) | [DATA_NEEDED: Rdson value] | — |
| Quiescent Current (standby) | [DATA_NEEDED: Iq value] | — |
| Betriebstemperatur | -40 C to +150 C (junction) | — |
| Gehäuse | PG-TSDSO-14 (exposed pad) | PG-TSDSO-14-41 (exposed pad) |
| Montageart | Surface Mount | Surface Mount |
| Anzahl der Pins | 14 | — |
| Charge Pump | Integrated (for 100% duty cycle) | — |
| Protection Features | Over-current, over-temperature, under-voltage, short-circuit | — |
| Diagnostic Output | Yes (status / fault feedback) | — |
| Control Interface | Parallel logic inputs per channel | — |
| MSL-Level | [DATA_NEEDED: MSL rating] | 2A |
| RoHS-Status | Compliant | — |
| Automotive Qualification | AEC-Q100 qualified (TLE94003EP family) | — |
| Product Type | — | Low-side power switch |
| Number of Channels | — | 4 |
| On-State Resistance (Rdson) per Channel | — | [DATA_NEEDED: Rdson per channel] |
| Continuous Drain Current per Channel | — | 470 mA |
| Load Voltage (Vbb) | — | [DATA_NEEDED: Vbb max] |
| Anzahl der Ausgänge | — | 4 |
| Input Type | — | SPI (16-bit) + parallel input pins |
| SPI Clock Frequency | — | up to 5 MHz |
| Betriebstemperaturbereich | — | -40 °C to +150 °C |
| Terminal Finish | — | Tin (Sn) |
| JEDEC / JESD-609 | — | e3 |
| Qualification | — | AEC-Q100 |
| Special Features | — | 3 V cranking, Limp Home (fail-safe) mode, open-load detection |