TLE94003EPXUMA1 vs TLE75004EPDXUMA1 Comparaison
Comparaison détaillée côte à côte de TLE94003EPXUMA1 par Infineon et TLE75004EPDXUMA1 par Infineon. Comparez les spécifications clés, les paramètres électriques, le conditionnement, le statut de cycle de vie, les prix et la disponibilité pour déterminer le meilleur composant pour vos exigences de conception.
Infineon
TLE94003EPXUMA1 - Triple Half-Bridge 5.5-20V DC Motor Driver | Infineon
TLE94003EPXUMA1 ✓ ActifComparaison des spécifications
| Paramètre | TLE94003EPXUMA1 | TLE75004EPDXUMA1 |
|---|---|---|
| Marque | Infineon | Infineon |
| Catégorie | Motor Drivers | Power MOSFET Drivers |
| Statut du cycle de vie | Actif | Actif |
| Statut du stock | In Stock | In Stock |
| Prix unitaire (USD) | $1,71 | $0,93 |
| Topologie | Triple Half-Bridge (3 independent half-bridges) | — |
| Type de sortie | DMOS power stage | — |
| Supply Voltage Range | 5.5 V to 20 V | — |
| Maximum Output Current (per channel) | [DATA_NEEDED: per-channel peak current] | — |
| On-Resistance (typ, per HS+LS) | [DATA_NEEDED: Rdson value] | — |
| Quiescent Current (standby) | [DATA_NEEDED: Iq value] | — |
| Température de fonctionnement | -40 C to +150 C (junction) | — |
| Boîtier | PG-TSDSO-14 (exposed pad) | PG-TSDSO-14-41 (exposed pad) |
| Type de montage | Surface Mount | Surface Mount |
| Nombre de broches | 14 | — |
| Charge Pump | Integrated (for 100% duty cycle) | — |
| Protection Features | Over-current, over-temperature, under-voltage, short-circuit | — |
| Diagnostic Output | Yes (status / fault feedback) | — |
| Control Interface | Parallel logic inputs per channel | — |
| Niveau MSL | [DATA_NEEDED: MSL rating] | 2A |
| Statut RoHS | Compliant | — |
| Automotive Qualification | AEC-Q100 qualified (TLE94003EP family) | — |
| Product Type | — | Low-side power switch |
| Number of Channels | — | 4 |
| On-State Resistance (Rdson) per Channel | — | [DATA_NEEDED: Rdson per channel] |
| Continuous Drain Current per Channel | — | 470 mA |
| Load Voltage (Vbb) | — | [DATA_NEEDED: Vbb max] |
| Nombre de sorties | — | 4 |
| Input Type | — | SPI (16-bit) + parallel input pins |
| SPI Clock Frequency | — | up to 5 MHz |
| Plage de température de fonctionnement | — | -40 °C to +150 °C |
| Terminal Finish | — | Tin (Sn) |
| JEDEC / JESD-609 | — | e3 |
| Qualification | — | AEC-Q100 |
| Special Features | — | 3 V cranking, Limp Home (fail-safe) mode, open-load detection |